I have copper 21 in a 20 vartag i can not get more then 17.7gr of reloader 7 in it with out a lot of heat, same with 4198 i tryed 18gr RL7 and i had a hard time geting the bolt open I see where some people are useing 19.2 gr
Try AA2200. That will typically cure your ailments.I have copper 21 in a 20 vartag i can not get more then 17.7gr of reloader 7 in it with out a lot of heat, same with 4198 i tryed 18gr RL7 and i had a hard time geting the bolt open I see where some people are useing 19.2 gr
I have a cooper model 38 in 20 vt and shoot 39 and 40 gr bullets with H4198. I found that 18 gr was max with rem 7.5's and lc brass. Adam really likes AA2200 but I haven't yet tried it. Keep in mind IMR4198 and H4198 are not the same.I have copper 21 in a 20 vartag i can not get more then 17.7gr of reloader 7 in it with out a lot of heat, same with 4198 i tryed 18gr RL7 and i had a hard time geting the bolt open I see where some people are useing 19.2 gr
I am using Lapua and remmington brass. I am going to stop buy copper arms next week i only live about 30 miles from them and see what they sayWhat brass are you using? Lapua brass fits tight on the neck in mine. Need to trim them to keep pressure down.