• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

20 Practical. LT32

Tim Singleton

Tim Singleton

Gold $$ Contributor
My CBI 20P barrel got here from Jim at Northland the other day. I've got a pile of 32gr vmax to load.
I have 16 lbs of LT32 I use in my 6ppc and 6br

I was thinking it should work well with the 20 P. Does anyone have any experience with this combo?
 
Plus 1 on VV N133. It is really accurate in my 20Prac. Clean burning too! Another good powder is Reloader 10X, but it is dirtier.
 
Went to the range with a load of 25.5gr H322 with 35gr Berger mainly velocity testing this load was running 3950fps.

Plan to try the LT32 next week for velocity comparison
 
I haven't finished my testing with lt32 but here is some chrono data from my test. not quite at max yet and a node was starting at 26.1 so i am going to retest with 26.3 through 26.7 to see what happens.

Code: 
25.3gn lt32 32vmax			
	  1)	3937	
	  2)	3964	
	  3)	4000	
	  4)	3986	
			
		 High:	4000
		  Low:	3937
		 E.S.:	63
		 Ave.:	3971.8
		 S.D.:	23.8
			
25.5gn lt32 32vmax			
	  1)	4045	
	  2)	4008	
	  3)	4012	
	  4)	4029	
	  5)	3990	
			
		 High:	4045
		  Low:	3990
		 E.S.:	55
		 Ave.:	4016.8
		 S.D.:	18.8
			
25.7gn lt32 32vmax			
	  1)	4082	
	  2)	4076	
	  3)	3982	
	  4)	4045	
	  5)	3996	
			
		 High:	4082
		  Low:	3982
		 E.S.:	100
		 Ave.:	4036.2
		 S.D.:	40.8
			
25.9gn lt32 32vmax			
	  1)	4072	
	  2)	4098	
	  3)	4052	
	  4)	4116	
	  5)	4106	
			
		 High:	4116
		  Low:	4052
		 E.S.:	64
		 Ave.:	4088.8
		 S.D.:	23.5
			
26.1gn lt32 32vmax			
	  1)	4131	
	  2)	4018	
	  3)	4118	
			
		 High:	4131
		  Low:	4018
		 E.S.:	113
		 Ave.:	4089
		 S.D.:	50.5

 
Biggdawg said:
I haven't finished my testing with lt32 but here is some chrono data from my test. not quite at max yet and a node was starting at 26.1 so i am going to retest with 26.3 through 26.7 to see what happens.

Code: 
25.3gn lt32 32vmax			
	  1)	3937	
	  2)	3964	
	  3)	4000	
	  4)	3986	
			
		 High:	4000
		  Low:	3937
		 E.S.:	63
		 Ave.:	3971.8
		 S.D.:	23.8
			
25.5gn lt32 32vmax			
	  1)	4045	
	  2)	4008	
	  3)	4012	
	  4)	4029	
	  5)	3990	
			
		 High:	4045
		  Low:	3990
		 E.S.:	55
		 Ave.:	4016.8
		 S.D.:	18.8
			
25.7gn lt32 32vmax			
	  1)	4082	
	  2)	4076	
	  3)	3982	
	  4)	4045	
	  5)	3996	
			
		 High:	4082
		  Low:	3982
		 E.S.:	100
		 Ave.:	4036.2
		 S.D.:	40.8
			
25.9gn lt32 32vmax			
	  1)	4072	
	  2)	4098	
	  3)	4052	
	  4)	4116	
	  5)	4106	
			
		 High:	4116
		  Low:	4052
		 E.S.:	64
		 Ave.:	4088.8
		 S.D.:	23.5
			
26.1gn lt32 32vmax			
	  1)	4131	
	  2)	4018	
	  3)	4118	
			
		 High:	4131
		  Low:	4018
		 E.S.:	113
		 Ave.:	4089
		 S.D.:	50.5

Click to expand...

Wow
LT can deliver the velocity. One of the things I wondered about.
I have had two 20P sold the first built another. They both grouped better in the 3900 fps node. You might try a lower node to see what happens
Thanks for sharing your information with us
Tim
 
Thanks i had a node in the 23gn area i will revist it.

here is my 40 vmax data i am going with 24.5 load

Code: 
23 LT-32  40 vmax			
	  1)	3534	
	  2)	3552	
			
		 High:	3552
		  Low:	3534
		 E.S.:	18
		 Ave.:	3543
		 S.D.:	9
			
23.6 LT-32  40 vmax			
	  1)	3643	
	  2)	3663	
	  3)	3674	
			
		 High:	3674
		  Low:	3643
		 E.S.:	31
		 Ave.:	3660
		 S.D.:	12.8
			
23.9 LT-32  40 vmax			
	  1)	3716	
	  2)	3726	
	  3)	3746	
			
		 High:	3746
		  Low:	3716
		 E.S.:	30
		 Ave.:	3729.3
		 S.D.:	12.5
			
24.2 LT-32  40 vmax			
	  1)	3792	
	  2)	3752	
	  3)	3759	
			
		 High:	3792
		  Low:	3752
		 E.S.:	40
		 Ave.:	3767.7
		 S.D.:	17.4
			
24.5 LT-32  40 vmax			
	  1)	3735	
	  2)	3817	
			
		 High:	3817
		  Low:	3735
		 E.S.:	82
		 Ave.:	3776
		 S.D.:	41
			
24.8 LT-32  40 vmax			
	  1)	3853	
	  2)	3853	
	  3)	3852	
			
		 High:	3853
		  Low:	3852
		 E.S.:	1
		 Ave.:	3852.7
		 S.D.:	0.5
			
25.1 LT-32  40 vmax			
max load ligth ejector swipe	  1)	3884	
	  2)	3903	
	  3)	3911	
			
		 High:	3911
		  Low:	3884
		 E.S.:	27
		 Ave.:	3899.3
		 S.D.:	11.3
			
25.4 LT-32  40 vmax			
over max load	  1)	3944	
ejector swips	  2)	3948	
			
		 High:	3948
		  Low:	3944
		 E.S.:	4
		 Ave.:	3946
		 S.D.:	2



 
The first lt32 and 32vmax test

my gun is a 24" polygonal Black hole weaponry barrel 1-10 twist rifle gas on a dpms heavy duty upper.

Code: 
23 LT-32 32 vmax			
GOOD LOAD	  1)	3585	
	  2)	3567	
	  3)	3524	
	  4)	3564	
	  5)	3539	
			
		 High:	3585
		  Low:	3524
		 E.S.:	61
		 Ave.:	3555.8
		 S.D.:	21.6
			
23.5 LT-32 32 vmax			
	  1)	3521	
	  2)	3622	
	  3)	3633	
	  4)	3654	
	  5)	3614	
			
		 High:	3654
		  Low:	3521
		 E.S.:	133
		 Ave.:	3608.8
		 S.D.:	45.9
			
24 LT-32 32 vmax			
	  1)	3754	
	  2)	3698	
	  3)	3746	
	  4)	3669	
	  5)	3753	
			
		 High:	3754
		  Low:	3669
		 E.S.:	85
		 Ave.:	3724
		 S.D.:	34.4
			
			
24.5 LT-32 32 vmax			
	  1)	3777	
	  2)	3851	
	  3)	3810	
	  4)	3857	
	  5)	3733	
			
		 High:	3857
		  Low:	3733
		 E.S.:	124
		 Ave.:	3805.6
		 S.D.:	46.5
			
25 LT-32 32 vmax			
	  1)	3906	
	  2)	3926	
	  3)	3950	
	  4)	3912	
	  5)	3927	
			
		 High:	3950
		  Low:	3906
		 E.S.:	44
		 Ave.:	3924.2
		 S.D.:	15.2
			
25.5 LT-32 32 vmax			
GOOD LOAD	  1)	4019	
	  2)	4040	
	  3)	4028	
	  4)	4026	
	  5)	4042	
			
		 High:	4042
		  Low:	4019
		 E.S.:	23
		 Ave.:	4031
		 S.D.:	8.7





 
Tsingleton said:
That 40gr vmax load at 24.8 is awesome
Can't ask for more than that
Click to expand...


if you look closely that is a 308 stray hole the group for 24.8 is a little lower, the best nodes were 24.5 and 25.1 but it is over max or right at max.

but yes one large ragged hole would be nice ;D
 
I bought a .257 Wby on a Win 70 (yes Model 70 of all things) from a gent who will take anything from a 742 and work with it till it will shoot whatever its best will be.

This one, Chambered with no free bore, was just an avg shooter he said until he started pushing the limits and the groups just sucked in. 3800fps with 100 grainers and basically one ragged hole. He was a former BR competitor for years so knew his way around. That is one dandy varmint getter. Sight in around 200 and hold on fur out past 400. It is FLAT.

If your powder ain't sensitive and you're not getting web expansion, you may consider staying with it..........providing it is safe - even though on the hot side. Maybe take one case and fire it until you get some signs that you don't want and see how long it will last then make your decision from there? Free advice is usually worth about half of what you pay for it............. ;)
 
So far every zero freebore 20 Prac barrel I've seen (5 in all) likes about .015"-.020" jump or a light/almost touch. Leade wear is light.
 
You must log in or register to reply here.

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Classified Ads

Forum statistics

Threads
165,839
Messages
2,203,998
Members
79,148
Latest member
tsteinmetz

Share This Page

Back
Top