20 BR loads requested

[Stormbringer]

Looking for loads for the 20 BR. Bullets used will be 32 and 40 grain.

Brass will be Laupa 6mmBR necked down. Primers will be either 205's or BR4's.

Powders on hand are:

Benchmark, H4895, Varget and Reloader 10. I have been to the section with the 20 br load data on this site and have used the Varget and H4895 loads listed as maximum.

Would really like to see some Benchmark and 10X data.

Thanks in advance.

Mike.

 

[2osok]

grettings just to tell you i am shooting 29.5grains of benchmark and 30.grain of n140 both just under 4000 fps neck turning and using pmc primers and 40grain v max and 26 inch barrel and r p a action hope this will help

 

[17VLD]

If you get some VV-N540 I'd suggest 31.0 grns and the 39grn
Sierra,Fed205M good for 4000fps and superb accuracy.
TTFN
Matt

 

[texote]

any loads for 55 gr bergers

 

[kjcpoint]

8208 works great.

 

[xswanted]

I used 32.4 grains of varget behind the forties. 4000fps and tiny little groups. Papua brass and BR4s

 

[rich44]

RL 15 is giving me my best groups with the 55 Bergers

 

[Phil]

I have a smoking load for the 39 BKing bullets and Benchmark.

The bullets were molyed and it was a hammer...

I`ll get you the info when i get home....i don`t want to go off of memory...

 

[DLANKO]

I shoot. 31.0 gr of Bencmark, 40 gr V-Max and a Rem 7 1/2 primer in a Lapua case. The rifle is a custom # 3 Ruger 24" bbl and the load chrono's 4100+.
This load is near max but shows no pressure signs in my rifle.
Denny