• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

175 Berger OTM, 185 and 175 BT LR for 308?

AllanR21

Silver $$ Contributor
Does anyone have any load data for these? This is for a 1 in 10 twist 20" barrel and I'm looking for F. Class shooting using lapua brass.

Thanks :)
 
Allan,

I'm loading to magazine length (2.900 max) in my 24 inch barreled Gap Hospitaller.
175 OTM: Lapua brass, CCI250, 43.3 grains Varget 2.880 OAL 2620 fps
185 BTLR Lapua brass, CCI250, 43.0 grains Varget 2.880 OAL 2608 fps
These loads are mild in my rifle, with case head expansion measured just ahead of the web of .001 or less, but use the appropriate loading cautions and work up.
Both loads are extremely accurate and I have shot them out to 822 yards (our range maximukm distance).
The 185's will buck the wind better, but the 175's in light to moderate conditions are deadly accurate.

Danny
 
Danny, I wanted to make sure that was with lapua brass? I've loaded the 175 VLD's with 43 grain of Varget and had no signs of pressure at all. My goal is to get the 175 to fly at about 2730fps so it'll stay at 1.2 mock at 1000 yards. My only concern is that I might have to prep some new Winchester brass so it'll have more room to add a couple more grains of powder.

I also bought a pound of RE 17. I don't see any data at all on this powder and 175 Berger's. It just might not be a good powder for this grain bullet?

Sorry to be long winded :)
 

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Forum statistics

Threads
165,846
Messages
2,204,816
Members
79,174
Latest member
kit10n
Back
Top