125gr Nosler BT loads for .308

[eagleI]

I have an AR-10 20" Eagle upper and its a tak-driver...Anyways I want a Coyote load with this bullet. Anyone load this? Thanks EagleI

 

[17VLD]

Way back when I used to shoot woodchucks with the 125BT
fired by 44.0 H-322 and a fed primer out of my M700 varmint
very accurate.Not sure how H-322 would work in your gas gun
might be worth a try.
Matt

 

[RJinTexas]

Every .308 bolt rifle I've ever loaded for shot extremely well with 51.0grs/W748 pushing a 125gr NBT. Ya might want to back it off a little in a gas gun.

Regards
RJ

 

[2506]

First off the 125 Ballistic Tip is a much tougher bullet than many people give it credit being. I have used it for quite a while for white tail deer hunting in a number of 30 cal rifles. My bolt rifle 308 load consist of this. WW case, CCI-BR2 primer, 46 grs IMR 4895, OAL 2.742 .This has been an extremely accurate load in a number of different rifles. If you want a very good bullet that will really come apart go to the 125 Speer TNT.

 

[30378]

My PSS loves 125 NBTs with 48.5gr of Varget. Seat'em long as possible.

 

[camac]

My Tikka bolt also loves the varget (ADI2208). 49gr pushing out 3150fps with CCI BR2 primers. Superbly accurate 0.4 MOA 5 shot groups in this rifle and as good as the Sierra MK. I pushed it higher quite comfortably but this was the accuracy node. Didn't mind too much being seated to magazine depth but slightly better at 10 thou jump.

 

[eagleI]

Awesome!! Thanks Guys. I am going to see if the locals have any on the shelfs today.