• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

107 vs 110SMK vs 115 DTAC RBT base to Ogive

Can someone take a measurement from a couple 107SMKs and a couple 110SMK, base to ogive for me please? If you have any of the new 115RBTs and could post that, it would save me some time and cash.

I appreciate the help,


Chris
 
All are approximate
107 .520”
110 .540”
115 .575”

Now measured with my comparator it which measures the ojive at .233” to base things change dramatically.
Including the length of the camparator.

107 2.047”
110 2.045”
115 2.145”

The 115RBT really fills in the throat fast.
 
Last edited:
Have all three, I'll see what I come up with, but it depends on what you use for a comparator, you'll get different measurements
 
Thanks, Guys. I throated a barrel .025" deeper than I expected and am a little concerned with errosion. I always jump my SMKs, so I don't think its going to hurt much (if at all) for the shooting.

I consider the Norma Dasher a touch on the small side for the 115s, but if I can get them to 2900 (30" 7.5 twist) and they hold the same accuracy as the 107s and 105s do, these may be the ticket to just running with it until it's time to pull the tube.
 

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Forum statistics

Threads
166,864
Messages
2,224,287
Members
79,965
Latest member
PBr
Back
Top