105 vs 115 length?

[alf]

Does anyone have the base to ogive measurement differences?

Wanting to know how much longer the 115's are over the 105's.

Throw an A-Max in the mix too, if you have one.

Thanks, Al

 

[Bryan Litz Ballistics]

Al,
This should do it:

-Bryan

 

[TonyR]

Al,
Bryan's data didn't come through on my computer so just in case:

Comparator Zero 1.108 inches
105 A-Max 1.708 inches with comparator
105 VLD 1.623
108 BT 1.694
115 VLD 1.710

 

[alf]

Bryan,
Your data didn't come through for me either. I tried calling today, 15 minutes after closing.

Tony,
I had 105 VLD's and A-Maxes to compare measurements, but no 115's. My new 6-284 has a looong throat. A-Maxes seat perfect, so I was hoping on the 115's being as long or longer. Bad news is I have to buy more bullets.

Thanks, Al

 

[GermanS1]

Right-click on the image squares in Bryan's post, select 'Properties' copy the Address,URL) and paste it into a new window. You'll see the image.

 

[Bryan Litz Ballistics]

Thanks German,
I checked it in the 'preview' before posting and it showed up fine. Thanks for the assist.
-Bryan

 

[Dubya]

Does anyone have the base to ogive measurement differences?

Wanting to know how much longer the 115's are over the 105's.

Throw an A-Max in the mix too, if you have one.

Thanks, Al

Hi Al, the Bergers that I have measure as follows;
115 gr. Tip to Tail = 1.361/Bearing surface = .540
105 gr. ' ' ' = 1.233/ ' ' = .459
Hope that helps, but remember each lot is a little different.
Gary.