precision

  1. SOLD *Price drop - 300 Norma For Sale: 300 Norma Magnum, custom built Area 419 Defiance Rifle

    For sale: FREE SHIPPING $5000 with scope $3500 without scope Built by Jon Addis of Area 419 300 Norma Magnum. 360 rounds through the barrel. Sub MOA with hand loads (will provide data to buyer). Willing to sell with or without nightforce scope. -Defiance Deviant Tactical Magnum, rollmarked...

  2. Three Things I Wish I Knew........

    I’ve been hunting and shooting for over 50 years, but only started handloading for my .222 Remington and .22-250 Remington ten years ago. Before then, my children and career didn’t leave time for handloading. But, as children left home and I started thinking about retirement, I got into...

  3. Recommended Front Rest for F-Class and LR?

    Hi All, I'm just starting to get into precision long range shooting and one of my goals is to shoot f class in a year or so once im ready. Right now i shoot off a caldwell front and rear bag and want to upgrade. From all the research ive been doing the best budget friendly option would be to...

  4. Varmint Hunter Magazines - $100

    Good Morning Everyone, 65 degrees, 60% humidity. Mostly sunny day today. I see myself spending quite a bit of time outdoors today! In the meantime, I am selling 70 issues of Varmint Hunter Magazine. Selling as a collection only. This is a nearly complete collection from 1997 thru 2015...

  5. Remington 700 300H&H Magnum

    Remington 700 in 300H&H Mag in a bedded H-S Precision stock. I had to touch up the stock on the cheek rest due to traveling with the stock rubbing against an ammo can (see photo)... 22" barrel. Rifle is used but not abused. I have taken photos while it was apart for cleaning and scope removal...

  6. Savage Axis II Precision in .223 questions.

    Hi all, I just recently ordered a Savage Axis II Precision in .223 (Savage website #57549). I was looking through my manuals (6 of them) for load data as I intend to shoot reloads through this rifle. Trouble I'm finding is data that applies to a bolt action rifle with a 22" barrel and a 1:7...

  7. Cavern Cove Rimfire Challenge (Series)

    I haven’t thought to post this before but hopefully somebody sees it and comes out to join the fun. Search the title to find location and date of next event. We have a monthly Precision Rimfire match in North Alabama, held on the 3rd Sunday of every month. This is a very beginner friendly...

  8. Best 130-150gr bullet 6.5 CM for Precision Shooting?

    So I have successfully loaded up my first pounds worth of powder with imo great success. But I'm looking to try to tighten up my groups with my Tikka t3x in 6.5cm. I've got a couple dozen Hornady match BTHP remaining but would like to get some ideas on my next option to be on the lookout for...

  9. Brownells geissele trigger sale

    For all you AR users, Brownells is having a very good sale on all Geissele triggers. https://www.brownells.com/manufacturers/geissele+automatics+llc/index.htm?avs|Special-Filters_1=Salezz1zzClearance On top of that use the Brownells discount codes 10 off 100, 20 off 200 Their national...

  10. Is this the correct steps of accurate reloading?

    So I am going from novice reloading, to try to be a little more advanced. Bought some equipment this week. And I am adding some steps to the process and am confusing myself a little at this point. So I am trying to get the steps in order, and want to be corrected if I am wrong or one of the...

  11. Lapua does not recommend re-annealing?

    Hey all, Was in Lapua’s website and for the 6.5 brass, they say they do not recommended Re-annealing their off the shelf factory annealed brass. Is their a reason for this? I know most on here anneal every time If I’m not wrong. So why does lapua say this and are they correct?

  12. Stardard press bullet seater vs arbor press bullet seater

    Hi all, As I am learning, and spend time on the forum, I start to have more questions. Sorry if I ask a lot. This like being in a room full of teachers. Today’s question is ;), if I was going with a non custom bullet seater (because I may be to late in the game with my barrel, not...

  13. Where benchrest guys measure bullet runout?

    Just picked up a 21 century concentricity gauge tool. But I don’t actually know where to place the pointer on the bullet. Near the top, ogive, or where it enters the neck case?? What do the benchresters do?? Where do you guys place the pointer of the gauge?

  14. How to turn brass to proper diameter?

    How do I determine the throat diameter of my barrel? I have basically figured out how to measure the rest the chamber. But I want to buy Peterson fat neck brass. I just don’t know how much I am suppose to turn it to. I am newbe to neck turning. Thanks

  15. Resizing only part of the neck??

    When I bought my Forster shoulder bump die/ neck die, in the instructions it says that you can loosely fit the bushing. This will cause you to only size about 2 thirds the neck. Leaving the bottle third to the fired dimension. Basically leaving a big external donut on the neck. They say...

  16. Flat base vs boat tail question in 300 blk

    So I went to the range with new gun. I shot 2 different bullets. This is a fun gun and a cheap gun and was not expecting much. The first rounds I shot were magtech 123gr. The grouping was what I was expecting from this gun. About 1”- 1.5” at 50 yards. Figured that was not bad for a...

  17. 220gr smk .308 Best Price?

    Does anybody know who has the best price on smk bullets, specifically 30cal, 220gr smk hpbt’s? Thanks
  18. johnnyi

    NALRSA Money shoot in Moore, Texas Sept 14-16

    I have been shooting these events since last year. They are a ton of fun with a chance to win a few dollars. Here is a video showing a brief highlight how it works. Rules and equipment details they have in their website. www.long-range-shooting.com

  19. Redding competition 30br dispenser question

    Quick question for anybody who owned one of these. I picked it up used and loaded it with h4350 tonight. When I tried to measure a 35gr charge, it came out 25gr. Is this because of the powder I’m using, or does it need to be calibrated some how? Thanks

  20. Bullet depth vs powder charge, which first?

    So I am developing a load for my rifle. And just got majorly confused. I am under the assumption that I have to figure out my powder charge before my bullet depth, but when I figure that out, I will then have to figure out my bullet depth which will change my powder charge??!! And if...

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Classified Ads

Forum statistics

Threads
164,764
Messages
2,183,786
Members
78,507
Latest member
Rabbit hole

Share This Page

Back
Top