mauser

  1. Mauser re-barrel question

    I have a customer that wants a Mauser action re-barreled. Looking at a take off barrel he supplied for a different action, there appears to be 3 surfaces? I'm seeing that I need to cut the tenon so that the inner and outer ring contact, typically most are saying to cut the tenon about...
  2. Mauser 25-06 AI

    Hey guys, I’m into the process of building a CZ Mauser 98 in 25-06AI. Thanks to yalls help on here giving me resources and people to contact! The rifle is equipped with a CZ 98 Action, leupold bases and 1” Rings, bent bolt handle and lugs lapped by Mike the Rifler. A Brownells short chambered...
  3. How do my stock repairs look?

    This was my first time using dowel pins fixing up a stock. They aren’t perfect and on one of the 2 I didn’t get the end of the crack so like 3 mm of crack is on the right side of the pin. I don’t plan on shooting any powerful loads through this old Mauser, mostly going to try and get good...
  4. Building a Custom Mauser

    Howdy, dad and I want to build a custom Mauser for some longer range shooting/hunting. I already I have the receiver, trigger and a Shilen 25-06 short cut barrel, we would also like to have it tapped for a scope and the bolt handle tuned to properly accommodate the scope. Could anyone point me...
  5. Cast Bullet Loads 8mm Mauser

    Howdy, I have a Steyr M95M I’d like to get load some cast bullets for. They are 180gr coated and gas checked. I’d like to propel them with IMR 4227. Trusty Lyman 45th edition says to load 20gr for a 168gr cast bullet. Would dropping 1gr for my heavier bullets work? I’ve done something similar...
  6. First Mauser Fix Up

    Got this Mauser from my uncle a few months ago and gave it a complete overhaul. I don’t even know where to start at, so I’ll just describe what I did to it- I also added some photos. I’m all ears to any suggestions y’all might have, I’m only 18 and got lots to learn! stock had MAJOR cracks and...
  7. dc.fireman

    Reloading for a CG 63 Mauser

    I have arrived at a load for my CG-63 Swedish Mauser, chambered in 6.5x55 SE, and would like to share some of the findings with anyone who might look for this info in the future. It begins with the Carl Gustaf's '63 (CG-63) competition rifle - which is an 1899 Swedish Mauser M96, chambered in...
  8. 8mm Mauser pet loads

    So developing a load for my 1940 Sauer made 98k. Using 200gr SMKs and 4064 lapua brass. Getting conflicting information from the loading manuals Sierra says 42.7 max, hornady says 47.0 max and Nosler states 46.0. Hodgdon states 44.5. All state the close to same velocity. So what is your...
  9. Mark X Safety Upgrade

    I have an Interarms Whitworth Express Rifle in .375 H&H. Even though it has a synthetic stock rather than walnut (sob), it is far and away my favorite rifle. The only problem I have with it is the ridiculous flappy Buehler-style 2-position safety. It is entirely too easy to accidentally bump it...

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Forum statistics

Threads
165,513
Messages
2,197,722
Members
78,961
Latest member
Nicklm
Back
Top