ammunition

  1. 30br bullet pointing???

    Dumb question. From what I have read, you really just start to see the results of bullet pointing after 300yards. And 30br for benchrest. which is the most popular sub 300 yard gun, so do 30br rounds ever get pointed? Seems pointless. Really did not mean to end that with a pun.

  2. Is the premier accuracy fli rite the best one?

    What is “the best” as far as concentricity gauges on the market. I know 21 century is up there, but the fli rite seems to be the only one that can actually fix the runout.

  3. Resizing only part of the neck??

    When I bought my Forster shoulder bump die/ neck die, in the instructions it says that you can loosely fit the bushing. This will cause you to only size about 2 thirds the neck. Leaving the bottle third to the fired dimension. Basically leaving a big external donut on the neck. They say...

  4. Flat base vs boat tail question in 300 blk

    So I went to the range with new gun. I shot 2 different bullets. This is a fun gun and a cheap gun and was not expecting much. The first rounds I shot were magtech 123gr. The grouping was what I was expecting from this gun. About 1”- 1.5” at 50 yards. Figured that was not bad for a...

  5. 220gr smk .308 Best Price?

    Does anybody know who has the best price on smk bullets, specifically 30cal, 220gr smk hpbt’s? Thanks

  6. Redding competition 30br dispenser question

    Quick question for anybody who owned one of these. I picked it up used and loaded it with h4350 tonight. When I tried to measure a 35gr charge, it came out 25gr. Is this because of the powder I’m using, or does it need to be calibrated some how? Thanks

  7. Bullet depth vs powder charge, which first?

    So I am developing a load for my rifle. And just got majorly confused. I am under the assumption that I have to figure out my powder charge before my bullet depth, but when I figure that out, I will then have to figure out my bullet depth which will change my powder charge??!! And if...

  8. Will powder charge change, changing brass?

    Well, It’s all in the title. If I have a load developed for say hornady brass, and wanted to switch to Peterson, will my powder charge Change?

  9. Bullet seating and neck grip question

    So I have a 6.5 creedmoor. The hornady eld match 140gr ammo I have used is 2.81 Oal. So I bought the hornady oal gauge with the 6.5cm cartridge. With the Berger 140 hybrid I measured 2.93/2.94. Does that sound normal? Seems like a massive jump. I am not “jamming” the lands but just...

  10. Sb p4fine reticle question

    Wondering how people like the sb p4f reticle. I am not a benchrest shooter, But I like zooming in to higher powers at 200yrds. Problem is, my Steiner 5-25 military with the msr reticle, when zoomed the cross hairs completely cover the bullseye by a lot. I love the scope, but not...

  11. Question for RPR owners / reloading

    i Have a question for Ruger precision rifle owners that reload. I have a 6.5. I am trying to find a magazine that allows for a longer bullet length. The magpuls that come with it just fit the factory ammo. With the tips litterally touching the plastic. I bought a magazine from...

  12. How much shoulder bump?

    Hey all, I am wondering how much to shoulder bump. I have once fired brass out of my rifle. First off, is once fired brass the actual size of my chamber? And I always need to bump back to that point? Or do I not bump the shoulder back on the once fired because it is the actual size...

  13. 21 century vs Sinclair’s digital concentricity gauge

    I know everyone is gonna say 21 century, but I’m drawn to Sinclair’s digital concentricity gauge. Easy and quick to read. Easy to set at the low point in the brass. Opinions and reviews welcome Thanks

  14. How is the Forster press built in primer seater?

    it would be a dumb question to ask if anybody has this press, so knowing most do, it the primer seater devise on top accurately seat primers or don’t waste my time setting it up and get a hand held? Looking for specific feedback on Forster press primer seater on top only Thanks

  15. H4350 in stock at sinclairs

    https://www.sinclairintl.com/reloading-components/powder/rifle-powder/hodgdon-powder-h4350-1-lb-sku749003595-34642-67302.aspx

  16. Forster bump shoulder die, Bushing question

    Im buying a Forster bump die, here is my question. My neck of load round is .290 The empty fired brass measures .295 I called forster, and the recommended I use .288 and get a .287 for when brass thins (this sounds right) The question is, with the .288 bushing I will be bumping my neck almost...

  17. Lee collet die or Redding s neck sizer

    Would or had anybody used the lee collet die over a Redding s neck bushing die

  18. 6.5 Creedmoor, small vs large primers

    I am setup to reload 6.5 with brass that accepts large rifle primers. But lapua brass states small primers are more accurate on that cartridge. Has anybody tested match quality primers large and small on 6.5?

  19. Forster co ax press. B3 vs B5

    I know what the actual differences are, but is there “worthy” differences between the B3 vs B5? Thanks

  20. Any Annealeez reviews?

    i am looking for a good, but low budget annealer. The annealezz I find very interesting and at a good price point for an automated annealer. Looking for any reviews/opinions if anybody has one. Thanks

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Classified Ads

Forum statistics

Threads
165,787
Messages
2,203,166
Members
79,110
Latest member
miles813

Share This Page

Back
Top