ammunition

  1. SOLD SOLD -- Assorted retail boxes of 44 Magnum and 44 Special Ammo

    I am selling 1100 total rounds. 720 rounds are 44 MAG and 380 are 44 Special. Prices are listed below. Buyer pays actual UPS ground shipping cost based on their address. If you would like to purchase the entire lot, I will sell it for $550 plus actual UPS ground shipping cost. No shipping...
  2. targetsportsusa

    New Blog: The Iconic AK-47

    https://blog.targetsportsusa.com/the-iconic-ak-47/

  3. SELLING New 17 Remington Fireball Ammunition - Remington Premier AccuTip- 20 gr (#PRA17FB) - x20 Boxes (400 rounds)

    New ammunition, in factory packaging/boxes. See photo. (Had plans for a rifle in this chambering, but stayed with the 221 fireball instead) X20 rounds per box - 20 Boxes total 400 rounds grand total. $35.00...now $30 per box $700.....now $600 for all 20 boxes I would also sell a minimum of 10...

  4. Ammo In Stock - 6.5 Creed, 6.5 PRC, 300 Win Mag

    Shooting 6.5 PRC, 300 Win Mag or 6.5 Creedmoor? Loaded Ammo IN STOCK! Norma Loaded Ammo - 6.5 PRC - 143 Grain HPBT Golden Target (20) $45 https://www.brunoshooters.com/mm5/merchant.mvc?Screen=PROD&Product_Code=3392 Norma Loaded Ammo - 6.5 Creedmoor - 143 Grain HPBT Golden Target (20) $32.60...

  5. Looking for this Ammo? Any suggestions?

    Can anyone tell me where I can find some of this ammo?

  6. Powder charge, winter vs summer nodes?

    I don’t do much cold weather shooting. Last summer my accurate node was 40.5, about 80-85 degrees, probably humid. Yesterday it was 50 and cloudy. I noticed I was at 42.5gr can it really change by 2 grains due to temp? The only other change I made was from Hornady to lapua brass...

  7. Adams trickler (static) problem? Maybe?

    So I went to do some reloads the other day. Loaded up the auto trickler and my powder drop. And after dumping the powder, the trickler started up to trickler the remainder. But even tho loaded with powder, the motor kept turning and turning. So I emptied it, blew down the tube, shined a...

  8. Which light small press for range reloading?

    I have been up in the air asking around. But wanted to get a general consensus. What is a good press for full length sizing at the range. I really want something smaller and lighter. As of right now, the only thing I can think of is the harrels compact and the rcbs partner. I wish I...

  9. Bullet seating variations for fclass or BR, whats acceptable?

    So I use a Wilson inline seating die with a hydro press. For what ever reason, I never checked my variations round to round for consistency. Don’t know why. But I got a Redding instant indicator in the mail (always wanted one) and so I measured 20 rounds for seating depth. The seating...

  10. Montour county rifles melplate uniformer review?

    Looking for reviews on the montour county Rifles melplat uniformer. I currently have the Hoover, But that little copper shard in the hollow point after trimming drives me bonkers, I would think that could deflect wind as well. Feels like it defeats the point of trimming. I see that...

  11. Bullet pointing/trimming based on bullet length?

    I pre-apologize for this question. I know opinions will vary and also, because I ask a lot of bullet measuring questions. Buuttttt. , in the recesses I’d my mind a thought hit me about tipping or trimming bullets. If the lengths are not the same, they will trim or tip differently...

  12. Technical aspect of Adams trickler system?

    I was pondering getting the Adams system. I’m not total dummy (only partial), but not a brain surgeon either or a software engineer. So how hard is it to setup and maintain? And can it be glitchy? Just kind of want a easy operation system like my charge master.

  13. Pacific super mag, 3 ram press parts?

    So I picked up this press, because I loved it on first site and thought it was the coolest thing I ever saw. But I need a few parts for it. This press is a little before my time, but not everyone’s, hehe. So wondering if anybody on here may know where to get parts, or if anybody may...

  14. Bore Tech Cu+2 Vs sweets vs wipeout.

    Hey all, I was looking to experiment with a few copper removers. I know there is a wide range of opinions. I currently use wipe out accelerator, with wipe out foam. By morning, the foam dripping out of the end of the barrel is a beautiful nuclear radiation bright blue. It never...

  15. Today only, Brownells free hazmat and shipping 150. And over

    Brownells has free hazmat and shipping today only, over 150.00. Code VD8

  16. Does auto trickle only work with fx120i?

    I was just wondering if the auto trickle system only works with the 120i scale. I have a a&d Fx700ct, which is love and is always very accurate. Was also very expensive. Is there a way to adapt to a different scale, Or software/hardware setup will be an issue?

  17. Importance of different bullet lots??

    Is it ok to mix bullet lots if you are separating by weight and bbto??? Or is there another reason not to mix lots. Just curious.

  18. 21 century lathe turning question

    So I am somewhat new to turning. And I purchased a 21 century lathe. I am sure my question apples to any lathe tho. When I feed in the brass, it cuts the brass as expected. So if I pull the brass out and send it back in, without adjusting anything, it take off more, than again, takes...

  19. 300blk reload data confusion

    So just starting to reload for pistol length, 1:8 300 blkout. I have Sierra 220 smk and h110 powder. Question is if you look at the 2 uploaded images, one is Hodgdon’s, and one is Sierra. H says 9.2gr is the max load, while Sierra says 10.1-12.2. So I cannot say I’m not confused.

  20. Labradar vs Magnospeed v3

    Before I make the purchase, I was wondering if there is any significant difference between the labradar and the magnospeed v3. Saving 200. wound be nice, but want what’s best and willing to pay more to have what’s right first time around. Looking at reviews, I don’t see a much of a...

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Classified Ads

Forum statistics

Threads
164,902
Messages
2,186,346
Members
78,579
Latest member
Gunman300

Share This Page

Back
Top