9mm

  1. SELLING Reloading bullets - Albuquerque Area Pickup

    I’ve got a mix of bullets that are just taking up space. If there’s anyone in Albuquerque, Santa Fe, or Los Lunas that’s interested in the WHOLE LOT, it’s yours for $100. Not interested in splitting or shipping. Item 1: Midway Cast Bullets 380 ACP, 95gr RN ~1/3 left of 500ct box Item 2...

  2. Loading Hornady 115 GN 9mm FMJ Round Nose Bullets

    I have a general question about cartridge overall length and seating depth for 115 GN 9mm FMJ cartridges. I've found commercial ammunition all over the place with regard to COAL. Winchester - 1.164 Remington - 1.107 Aguila - 1.112 Federal - 1.149 Blazer - 1.154 All my 9mm guns feed...

  3. 9mm 115gr COL

    I am using VihtaVuori N320 powder and a 115gr FMJ RN bullet. I am using their provided load data, but the gun would not eject or would not cycle sometimes even with higher loads. I set the COL to the max, so I am aware it results in lower pressures and that's what's causing the issues here...

  4. 9mm PCC Competition Reloading

    Just finished my 9mm competition PCC with 5.5" shrouded to 16" barrel, and short stroke JP Silent capture spring. what i am looking for is some pointers on ammo to use, what to reload with and anyone's experience to keep that dot steady for a follow up shot. Please share your opinion Thanks in...

  5. Newb Here - need help with progressive press info

    I only recently decided to start reloading. I am sick of the ammo shortage. After hours of research into press types, I have decided I want a single progressive press for reloading the following: Pistol: 9mm, .40 S&W Rifle: 30-40 Krag, 30.06, .223. I am interested in knowing actual press...

  6. *DILLON DILEMMA* Version 2

    To all that replied to my earlier post, thank you so much. I’ve received excellent advice, and I am so glad that I posted here before purchasing anything. To recap, I shoot USPSA and 3 Gun, and I’m looking to load bulk 9mm now and add on .223 in the future. Per advice from the previous thread...

  7. *Dillon Dilemma!* Advise and suggestions please!

    I shoot USPSA and 3-gun matches religiously, and I’m looking to reload bulk 9mm and then add in .223 sometime in the future. I plan to deprime with a Frankford arsenal hand de primer, wet tumble with stainless pins, then load in the Dillion 550. I have access to everything I need to pour and...

  8. Will height pressure cause slide lock??

    Need advice : 3.8gr of titegroup with blue bullets 125g coated OAL 1.114. Slide sometimes locks back with full magazine. Glock 19. I was 100% off the slide lock. Can high pressure cause this? I can’t imagine the pressure is too low. Brass looks ok, no signs really of either. I don’t have a...

  9. Why the cannelure on 9mm bullet?

    Federal has a fairly new 9mm 124gr HST bullet in 9mm, but they're available in loaded ammo only. I did find a company named American Reloading that had some of these bullets pulled from factory reject loaded ammo. These may have been loaded for the military because there's a small ring of red...

  10. Loading 9mm for CZ P09

    I'm new to reloading for pistols. I am reloading 9mm for my CZ P09 for uspsa shooting. The pistol shoots any factory ammo I have put through it from 1.111 to 1.160 COL. I am working up a load for 124 gr. square nosed plated Berrys bullets. I can fit the resized brass fine into the barrel...

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Classified Ads

Forum statistics

Threads
168,335
Messages
2,252,680
Members
81,223
Latest member
Hunterrancher15

Share This Page

Back
Top