Search results

  1. Case Resizing

    rwj, Based strictly upon my own experiences and having done it both ways, what I've found works the best (for me using Redding Dies, Lapua Brass and now testing Peterson Brass in 260 Rem), I first fireform my brass regardless of the brand; slightly turn the necks (using a Redding Type S...

  2. SEB Neo question

    Gene, I know the feeling. I just turned 71 and have the same thoughts of getting "a proper BR Rifle" while I'm still around to enjoy this sport. Don't get me wrong, my BR rifles are all good shooting babies, but none have those custom actions like a BAT or other QUALITY actions that the...

  3. Accuracy went south

    Chet, Just out of curiosity, have you measured how much throat/rifling degradation you have in that barrel as compared to when you first started shooting that rifle? A quick way to see is to take a shot casing - resize it and start to seat a bullet that you have records on. Then close the...

  4. brass death

    As to the original post, I'd say it depends on the caliber and how much I've turned/taken off the necks in thickness. Sometimes its cracked necks and sometime its loose primer pockets. Depends also on the loads/pressure I've been shooting. I believe its also knowing how your rifle treats the...

  5. SEB Neo question

    You might consider calling Protector and ask if they make a front bag that specifically fits your NEO rest. They do make specific bags for various rests and that may take care of you problem. Just an idea. Good luck and DO NOT PART with that NEO rest!!!!!! Alex

  6. Best case mouth deburring tool

    Travis, Question: Did you turn the new brass after fireforming just to clean it up? I reload for my .260 Remington and started using the new Peterson brass that I turned after fireforming (as I did with Lapua before). I use much the same process as do you and use a RCBS VLD deburring tool...

  7. BULLETS.COM Wrapping up!

    Sorry to see a decent company to have to close their doors for a variety of reasons. But I really believe most folks don't understand the amount of "capital" and personnel it takes to run, maintain growth and to keep in step with competition. And now the liberal flavor of our country has...

  8. Off topic....but....A glimpse of America

    Chuck, In the years that we've known each other, never knew you to be a "writer" who could put to words, an event that clearly demonstrates sensitivity, feeling, honor and a respect that only those who served, could appreciate all that you wrote. But your words and actions, reminds us of the...

  9. Want to get into reloading for accuracy

    Richard, You were reading my mind. And that sums it up very nicely!!! Alex

  10. Want to get into reloading for accuracy

    That's a pretty "generalized" statement. Care to elaborate on which "stuff" is made up? Just curious. As to a custom rifle, if I were to build a rifle for accuracy, I'd start with a Remington 700 Action (stainless and NOT a take apart off an across the counter Remington Rifle) which I've...

  11. ●Under 21

    LH, Couldn't agree with you more. Sometimes, I'm not sure if people simply cannot express themselves by not CLEARLY expressing their views, or whether they are left wing liberals who never served in the military. Whichever their handicap, they throw dirt on honorable men and women who put it...

  12. Lester Bruno is advertising H-4350 in stock

    Its a free country so buy or don't buy from whomever you please. Its all the fuel injected power snivelin that I find humorous. But of course the cry babies above probably don't pay much to support this website of which Bruno's is a site sponsor.

  13. Loaded runout vs neck runout before loading

    David, Though I agree that the Expander Ball can be the culprit, I would offer that often it is the Seater Stem that is bent to which the Expander Ball is connected. A good way to find out is to remove the Seater Stem completely and run the casing through the die. This also checks the...

  14. Discount for Accurate Shooter forum members and Mil/LE

    Sean, Would you clarify if your discount applies ONLY to active personnel in those fields of endeavor. In other words, does that 40% discount apply to RETIRED or former personnel in those fields of endeavor as well or do those folks only get a 10% discount? Thx. Alex

  15. New To Me Rest

    Randy, In case you are unaware, Protektor makes the Windage Top Bags in Super Slick material for all of Dan's Windage Tops. They sell them in packs of three and replace the material ones shown in your picture. I have the Super Slick material bags on all three of my Greenlaw Rest tops and...

  16. Best gunsmith in az?

    Lester is not fast, but he's good! Gary is usually super busy and it might be difficult to get him to accept the job. Remember also, the Berger Nationals are coming up in Feb and I'm sure Gary and Lester will be there as usual. I don't know Bob so I can't comment on whether he has the time to...

  17. Whidden Die Decision

    Unless you are out to spend money, heed the words of 243winxb. Yes dies are important in the reloading process, but overall, its the quality of the rifle itself that can make one rifle shoot better than another. And Gas Guns are NOT as accurate as Benchrest Bolt Guns for a variety of reasons...

  18. Best place to buy A&D scale

    May want to check out www.affordablescales.com . Reasonable pricing and excellent customer service. Alex

  19. Finally Found 6br Lapua Brass

    James, I believe the more appropriate name for us old farts (once you pass 65) is the "Age of Discovery." Every morning you wake up after that age, you DISCOVER some new ache or pain you never even thought about. If thats not enough, when you go see your doctor for your annual physical, he...

  20. Question - Article in Daily Bulletin

    Thx to all for the resdponses. And Butch...you are right......early morning brain disease and my fingers wandering around the keyboard in need of caffeine. Thx! Alex

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Classified Ads

Forum statistics

Threads
167,067
Messages
2,226,930
Members
80,176
Latest member
toddmcfadden

Share This Page

Back
Top