Search results

  1. Another tuner target

    If she's thinking like that his RIFLE is most likely the problem! ;););)

  2. +P chambers

    Some peoples children! I have 2 custom throat rifles, one was made by the barrel maker and one was a 3rd party barrel supplied to the smith. Both rifles had dummy rounds supplied to the smith loaded with my projectile. In the case where the barrel manufacturer was the smith I expected he...

  3. Another tuner target

    Is this for competition or hunting?

  4. New at reloading need opinion

    I agree the investment in money and time may be more than I'm willing to do. I never compete except with varmints! ;);)

  5. New at reloading need opinion

    That's has to be some hard brass assuming that we're talking 62,000+ PSI.

  6. New at reloading need opinion

    Well that's like saying Wheaties are not Cheerios! I'm a hunter I don't wildcat nor compete, my use of brass is to buy few hundred rounds of the same lot factory loads, shoot factory as a control, I load the empties, load that brass. As the brass ages I buy a few boxes of same lot factory and...

  7. New at reloading need opinion

    Ok lets hear it. What's the deal with Alpha brass?

  8. Facts RE SIG P320 Issues?

    Sig lost a request to halt a ban on the P320 at a Washing Police training facility. This should bolster any issues that other ranges may have on a ban.

  9. New at reloading need opinion

    Well yes but the primers don't reflect an out of tune bolt. The ejector mark and the burnish marks on the case head seem to indicate the the bolt is not true to the case head. I would assume that if the bolt was trued up that the pin bushing would jut be done at that time even though me and...

  10. New at reloading need opinion

    Can I ask if there has been any work done on the bolt? The primers look like they're flowing into the firing pin, but the edges of the primer still don't look flattened. It may be possible that the bolt id not true to the plane of the chamber.

  11. 6mm ARC or 338 ARC for Hunting Under 200 Yards

    I'd go for the 338 with supersonic rounds. I'd want the bigger caliber hole with the reduced velocity because of the short barrel.

  12. The Swede

    The SAAMI load list about 55,000 the proof of the actions from the internet. All Swedish Mauser bolt actions were proof tested with a single 6.5×55mm proof round developing approximately 455 MPa (65,992 psi) piezo pressure (55,000 CUP psi) In any case the action requires that you NOT THINK like...

  13. Photographers here -- What are you shooting at?

    This pink thing was a challenge!

  14. Photographers here -- What are you shooting at?

    That's what I'm talking about!

  15. The Swede

    If you decide to work with an older Mauser 1896 remember that the pressure is tested to 65,300 PSI

  16. The Swede

    I shot a few ( about 100) and they shot fine with Reloader 22, more accurate then the Interlock, I went with 140 grain Interlock I believe and stopped them because they were way too tough for deer. The 129 works perfectly on deer.

  17. The Swede

    Having a new safety placed on mine and the barrel cut back to 25". I use Reloader 22 with the longer barrel, get plenty of velocity with low pressures. The 129 grain works great for deer, I tried the 140 but they were too tough a bullet.

  18. How is this possible? (The long version)

    Just the kind of rifle I call a keeper. ;)

  19. The ultimate suppressor

    No wonder they lost 2 world wars!

  20. 6 ARC for youth.

    Be extremely careful and either load for gas gun pressures or mark the containers of your reloads BOLT GUN ONLY!

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Classified Ads

Forum statistics

Threads
166,961
Messages
2,225,819
Members
80,084
Latest member
H3NN13

Share This Page

Back
Top