Search results

  1. Die that doesn't touch the shoulder?

    Cut the top off the die and you won't have a shoulder bump. If you need more sizing grind the bottom of the die off until it sizes to your dimension. Lee probably makes the cheapest die.

  2. Savage Barrel Removal

    The last one I took off had the smooth factory nut and it stuck on the barrel after I removed it from the action. I had to heat it up to get the thread locker to release and it also has blasting media in the threads. Remember to recheck the headspace after tightening the nut as it can change...

  3. What the hell happened -- Case pressure???

    One thing to remember is that the temp stability rating is not linear. While Varget shows 0.13 FPS/degree this may hold from 40F to 85F but above 85F it can increase much more which is probably what you experienced. Most powders seem to increase speed around the mid 80's.

  4. WANTED Rem 700 SA RH Target/ Benchrest Stock

    Short action 700 clone right hand, 3'' wide maximum at the for arm Thanks !

  5. 20 ppc loads

    https://forum.accurateshooter.com/threads/20-ppc-powder-choice.4077822/...

  6. Squib load...bullet stuck

    Send it to Remington and they will fix it up real good for you !

  7. Coyote on the rocks

    HAHA, he got tricked !

  8. Brushed Firing Pin

    Paul at Pro Precision does excellent work and quick turn around time for bolt bushing. https://boltfluting.com/index.html https://forum.accurateshooter.com/threads/shout-out-to-boltfluter.4153495/#post-39224379

  9. A little night-time coon hunting.

    Yes, nice looking fur.

  10. Shout out to Boltfluter!

    https://boltfluting.com/

  11. Thoughts 0n Middle man mark up

    Many of those on amazon are counterfeit but I buy after market anyway ; https://support.dewalt.com/hc/en-gb/articles/360061447531-How-to-identify-counterfeit-DEWALT-Batteries Check car part prices on rockauto.com and see how much your local place marks them up, it's crazy.

  12. Prayer Request

    Get well Nick !

  13. A BBQ thread

    Bone in ribeyes and elk burgers for Memorial Day

  14. Trail camera pics

  15. New Rifle

    All of them were new factory rifles, Ruger, Savage, & Browning.

  16. New Rifle

    All of the rifles I scoped at the gun store had much more copper than that.

  17. New Rifle

    I took my Teslong scope to a Turners Outdoorsman to check out a Ruger American Gen 2 as I have never seen a Ruger barrel. It was between Ruger and Savage and I've seen plenty of Savage barrels. To my surprise all 5 "new" barrels I scoped had a LOT of copper in them and one had a dusting of...

  18. AMP graph - 0.004" vs 0.002" neck tension

    On the graphs bottom "inch" section does the 0.000 on the right represent a seated bullet and the left is initial seating ? Very interesting, thanks ! I have noticed more consistent seating pressure(by feeling) with various lubes but velocity spreads ES went up, except with HBN. Now I don't over...

  19. Weird sizing / seating issue

    He is using Hammer bullets that do not have a conventional flat bearing surface like lead bullets.

  20. A18 for squirrels

    We have been using one for about 6 months and the counter is at 43 but a couple of those were me testing to see if the CO2 still had any gas left. It says ~100 firings per CO2 bottle but mine ran out at about 25. Mine is for ground squirrels so I mounted it on an upright 2"x4" on a 18" square of...

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Classified Ads

Forum statistics

Threads
166,824
Messages
2,223,953
Members
79,867
Latest member
Steve1984

Share This Page

Back
Top