Search results

  1. Cloudrepair

    Brass not fire forming

    Have you cheched the chamber with a headspace gauge ? That is the first thing i would want to know for sure . Maybe they arent seeling because of brass to thick like what was said above ? I havent had a problem like that with any of my ai's have you measured the cases to unfired cases at 200...
  2. Cloudrepair

    Tuning Neck Clearance Levels

    As long as you have clearance in the chamber used . Actually i think that the chamber dictates the clearance if i understand you right . I dont really see what changing that much will do it seems we are talking maybe a .002 window that will probably have best results in .002 of finished round...
  3. Cloudrepair

    alpha brass

    I just got 100 alpha bra brass and i have a wheeler chamber with the reamer from jgs also so i guess im hoing to find out soon. Just bought the brass a couple weeks ago
  4. Cloudrepair

    Browning X-Bolt

    I didnt have any problem with my stainless abolt. That wouldnt be fun if a 32 thread per inch did gall.
  5. Cloudrepair

    Tool to keep small brass particles off the shoulder inside WFT case mouth trimmer

    Can of compressed air for keyboards to spray it off?
  6. Cloudrepair

    T3x and T3 spec question

    That is how I got my second number plus the diameter of the hole
  7. Cloudrepair

    T3x and T3 spec question

    After disassemble I am getting 6.988 Even that measurement may be a bit off say plus or +/- .005
  8. Cloudrepair

    T3x and T3 spec question

    If you need me to ill disassemble it and messure it more accurately I need to anyway so maybe I'll do that anyway and check back
  9. Cloudrepair

    T3x and T3 spec question

    It is looking like 7.039 or 178.7874mm I could be a little off because of my setup
  10. Cloudrepair

    SOLD Harrels press mag version

    Ttt
  11. Cloudrepair

    SOLD Harrels press mag version

    Harrels press mag version new unused 200.00 shipped. Added a piece to clamp better.
  12. Cloudrepair

    Any early savage action guys here?

    I got one that was a mid length action. Because the pin in the bolt head is at a different angle I took a old long action bolt body and mad a new bolt for it that takes the new head with the extractor pin and flat bolt face, new firing pin. Now I can use aftermarket barrels although i chamber...
  13. Cloudrepair

    44 Magnum, 240 grain JHP and Win296 min & max help?

    And a 9th
  14. Cloudrepair

    44 Magnum, 240 grain JHP and Win296 min & max help?

    Or maybe this one the 7th also and a 6th addition
  15. Cloudrepair

    44 Magnum, 240 grain JHP and Win296 min & max help?

    May e this will help 7th addition
  16. Cloudrepair

    Nickle-jacketed bullets

    I like brass,copper,zinc if I have to deal with werwolfs I think a good varmint bullet will still do the job even if it takes a few in quick work. In any case I would like to make my barrels last as long as they can with these components. Nickel is very hard stuff I think that is why inconel is...
  17. Cloudrepair

    Nickle-jacketed bullets

    That sounds like a fast way to wareout a barrel
  18. Cloudrepair

    Tramming

    Mine is similar to butchs. I would take vice off the rotating part and bolt it directly to the table. That is likely where the error is. If not you may want to get a better vice
  19. Cloudrepair

    Tramming

    Would you show a Pic of your device?
  20. Cloudrepair

    Tramming

    And it all depends on how flat your table is also. If table is out .0015 from end to end flatness like most knee mills I've seen. is each end consistently out. is it out in the y also. Have you checked the table flatness? I always dial/tram in the table. The vise should be flat or be parallel...

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Classified Ads

Forum statistics

Threads
165,562
Messages
2,198,470
Members
78,984
Latest member
Deon

Share This Page

Back
Top