Search results

  1. 1 mile anyone?

    im sure 6.5-284 will do the job but i was just looking at load data for 6.5/06 in nosler data and it keeps up and in some cases surpasses 6.5 prc and and 6.5/284 velocity wise. never had one of those but always heard good things about them. Id be trying a 26 Nosler or the like though.

  2. New RCBS RockChucker Press question…

    i may not have read all the replies but i wonder if the step is to provide clearance for the old primer compund that gets built up at the ram/casting and has worn some presses in the past.

  3. New RCBS RockChucker Press question…

    well the small side of the ram cant be contacting the hole in casting can it.

  4. New RCBS RockChucker Press question…

    so is the ram one piece or is is screwed together at that point? the top couple inches (toward shellholder) of ram dont contact the hole in casting? i havent seen seen butt wonder why also

  5. Dedicated Gun/reloading workshop building.

    No Wife sounds better — much more room for the guns ect and no gripes when you buy a new one(gun):D

  6. Dedicated Gun/reloading workshop building.

    i really wanted to put in a concrete gun room but thinking about it i realized i could cut a hole in any door i could afford in a few minutes and and im no professional. i decided why spend the $ on it at all.. each 2 their own though and if we are both happy with wat we got thats the main...

  7. Dedicated Gun/reloading workshop building.

    a tin can you meen—————-a concrete gun room is a great idea— thing is seems to me the door is the week point and it kind of voids the strength of the concrete walls. also if OP builds a concrete vault dont forget to calulate the footings needed to hold up that much weight.

  8. Dedicated Gun/reloading workshop building.

    i built a pole barn but would conventional frame it if i did it again. of coarse i left my rafters exposed. id seriously look at steel frame buildings to— will it be attached to house? do like dryh says and make your svc doors at least 42– get them that open out.

  9. Changing Seating Depth

    ive done it this way for 6br loads and i admit ive left the primers in a few times instead of pitching them like normal but i now pitch those primers in the suspect jar.

  10. Changing Seating Depth

    of coarse i came from a past where primers cost less than a penny and since they were so cheap i didnt mess with them at all. i even threw them away when there were a few left in the tray cause i didnt want to bother putting them back in the box. now thats different. i know primers are made...

  11. Changing Seating Depth

    when i pull the bullets on a rifle cartridge the neck tension is never the same if i just seat them again. its always less. also with the force i hit a kinetic puller on a steel plate what will that do to the priming compound.—- in this case i would pull the bullets with a collet puller, dump...

  12. Can’t get myself to buy “seconds” bullets

    back in my younger day when i had plenty of time and components were cheap blems woulda been fine for much of my shooting. dont remember them being around then though. mabie the LGS didnt want us to know. these days im in late 60s and shooting time i have left is limited whatever it is and...

  13. Why are these Flat Spots on my Shoulders

    have you tried the outlaw lube with lanolin? ive got the lanolin but havent mixed it yet.

  14. Why are these Flat Spots on my Shoulders

    ive used imperial a long time to and i never got a stuck case. have got plenty of dents but usually when i wasnt paying enough attention and overlubed—. sometimes when i was trying to size something down. it always has worked well for me. i am guilty of not cleaning my dies enough. i need to...

  15. Why are these Flat Spots on my Shoulders

    took the lock rings off several dies today (yesterday) to see if the hole was blocked. i knew it would be my luck the hole would be under there. saw forester is smart about it and puts the hole at the top of the die.

  16. Why are these Flat Spots on my Shoulders

    it does seem i was pushing the shoulder to far back. also no vent hole that i could find. Im still at it- thanks

  17. Why are these Flat Spots on my Shoulders

    im wondering more about my chamber than i am the brass. will check more later today. i do have two other chambers from that reamer in other guns. ill be reporting back. thanks

  18. Why are these Flat Spots on my Shoulders

    ok— ive seen the ones in the threads to. i dont think redding puts them in cause i looked at several other redding dies today to. im gonna call them to see,,, thanks

  19. Why are these Flat Spots on my Shoulders

    no- prob 15 firings on it. i will check how far the necks go in bushing. i did check case length today and i think they r all rite—— thanks

  20. Why are these Flat Spots on my Shoulders

    yyy
View older results

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Classified Ads

Forum statistics

Threads
165,516
Messages
2,197,803
Members
78,961
Latest member
Nicklm

Share This Page

Back
Top