SELLING Action Removal Tool

[Poor Shot 65]

Action Removal Tool


I use this to remove actions from their bedding so that the action is removed straight up and not at an angle (thus chipping the bedding). Also can be used to remove glued in actions - apply the tool and then use a heat gun to break the glue.


This works by sliding onto the picatinny rail and then tightening a nut to pull the action directly up from the stock.

It will fit over action diameters that range from 1.35" (BAT Model B etc) to 1.47"+ (Black Knight etc)

I made several of these for some people who I shoot with and they thought it worked very well. I have a couple of tools remaining that can be sold.


Not looking to make a profit, just want to re-coup the money spent on aluminum.


$50 to your door - CONUS only

 

[Mblmotors]

I will take it. Very cool.

 

[Poor Shot 65]

I just used this tool to remove a glued-in action that I sold on this site. Put pressure on the tool by tightning the nut and turn on a heat gun. Took 2 minutes to release the action. easy peasy.

I have several more if someone else wants one.

 

[SBS]

I'll take one of these. Great idea. Sending DM

 

[Mike Montgomery]

I'll take one also. Sending PM.

Thank you,

Mike Montgomery

 

[tharger]

I'll take one of you have it. Pm me with address to send ck to

 

[tharger]

Woops, I need one that will work on a dovetail

 

[Pheasanthunter]

Action Removal Tool


I use this to remove actions from their bedding so that the action is removed straight up and not at an angle (thus chipping the bedding). Also can be used to remove glued in actions - apply the tool and then use a heat gun to break the glue.


This works by sliding onto the picatinny rail and then tightening a nut to pull the action directly up from the stock.

It will fit over action diameters that range from 1.35" (BAT Model B etc) to 1.47"+ (Black Knight etc)

I made several of these for some people who I shoot with and they thought it worked very well. I have a couple of tools remaining that can be sold.


Not looking to make a profit, just want to re-coup the money spent on aluminum.


$50 to your door - CONUS only




View attachment 1733673View attachment 1733674




View attachment 1733675View attachment 1733676

I will take one if available

 

[Poor Shot 65]

Woops, I need one that will work on a dovetail

Yup you are correct -- this will only work on a picatinny rail.

 

[Aceball]

I'll take one.

 

[Albany Mountain]

I would take one please
PM details

 

[47Lapua]

Excellent idea!!! If you have any left I would be interested in one. Thanks for sharing

 

[Florida Wally]

I’ll take one if any are left. Sending dm.

 

[Chasin Beaver]

I will take one.

 

[DANNY-L]

Will this work on wooden stocks without damage? Great idea and looks to be well thought out.

 

[Poor Shot 65]

There are a total of 8 units. So far it looks like 7 have sold - so 1 left.

This is what I have - please let me know if I have missed anyone

SPF @SBS
Sold @JustDreaming
Sold @Mblmotors
Sold @Mike Montgomery
Sold @Pheasanthunter
Sold @Florida Wally
Sold @Chasin Beaver
Sold @Naildriver_2007

That was the last one. If there is more interest I can make another CNC run in a week or so - please let me know.

thanks

 

[Naildriver_2007]

I’ll take the last one.

 

[kdoginredding]

I'll take one if you do another run. Thank You

 

[trgtsnpr1]

If you do another room, I will take one too thanks Bill

 

[saltonman]

I will take one when you do another run. Very good idea!!!!!!