103gr is just about the perfect weight for the 6BR…Then they should make a 104 and crush the competition. Hoping for something exciting.
They also said it could be either 133 or 135 grain when finalized and brought to production.I am
I am interested to see profile etc.
I "Was" getting, "average So-So" Group's, @ .020 "Off" from my $2,700. Rifle that Has most All, the "Goodies",.. 4's to 1/2 MOA and started doing some research, on "Here" Old Posts about, THIS Bullet,.. you'd Be surprised what you can Learn with, a Little research ! Shoved them In, "Deeper" and Blammo,.. 5 shot's, in the 2's and 3's !107's love to be in the lands. I start with far enough in that the engraving marks are square and then work back. Many times I just leave them there they shoot so well.
Don’t be shy about trying farther in. It might get even better.I "Was" getting, "average So-So" Group's, @ .020 "Off" from my $2,700. Rifle that Has most All, the "Goodies",.. 4's to 1/2 MOA and started doing some research, on "Here" Old Posts about, THIS Bullet,.. you'd Be surprised what you can Learn with, a Little research ! Shoved them In, "Deeper" and Blammo,.. 5 shot's, in the 2's and 3's !
I'm glad you tried them in and found the magic of 107SMK's! At a certain point if you go in far enough you start running the risk of sticking a bullet in the lands if you need to take one out before firing it too. Something I forget to consider sometimes..@ SWD,.. 2's and 3's are about, as good as I can shoot at, My Age and,.. out in the Idaho Desert Country as,
Cold and Windy then,.. Hot and Windy, sometimes ( Still Days are,.. a Rarity ).
I'm Not, a BR guy,. Just Steel Plates and Varmint accuracy for, Me !
My 16 y/o grandson, shot 5, 8 inch dia. Steel Plates in a Row, w/ my 6XC at, 700 Yards.
( W/ the 107 SMK's )
A tiny bit sleeker than the 107.Just got some of the new Sierra 105 MKs. I'll wait for icemageddon to pass before I try these, but here's a pic. L to R, 107 SMK, 105 SMK, 105 Berger Hybrid.
Interesting to see the differences. Thanks for the picture.Just got some of the new Sierra 105 MKs. I'll wait for icemageddon to pass before I try these, but here's a pic. L to R, 107 SMK, 105 SMK, 105 Berger Hybrid.
According to their video, tangent.Is it tangent, secant or a hybrid?
What are they saying the BC is on the SMK 105gr ?Just got some of the new Sierra 105 MKs. I'll wait for icemageddon to pass before I try these, but here's a pic. L to R, 107 SMK, 105 SMK, 105 Berger Hybrid.
For those into numbers, here's a random selection from a box. BTO is quite consistent. TTB = tip to base ogive. Bearing surface by difference.Just got some of the new Sierra 105 MKs. I'll wait for icemageddon to pass before I try these, but here's a pic. L to R, 107 SMK, 105 SMK, 105 Berger Hybrid.
Did you find yours from a retailer?For those into numbers, here's a random selection from a box. BTO is quite consistent. TTB = tip to base ogive. Bearing surface by difference.
