Anschutz Trigger parts

[houligan]

I hope I'm posting this in the right section. I have a couple of Anschutz early 14xx triggers that need repair or a rebuild. I'm looking for all parts for the Anschutz 1411-U2, the 1407-U8 (I hope that is the correct number) and the 1407-U9. Definitely need the bell shaped adjusting screw #85, the catch link #88, the catch # 101. Also need the cross pins for the whole assembly. All these parts numbers are from the Anschutz schematic and owners instructions that come with the 1400 series match 54 rifles.

These triggers were bought used and are pretty tired. If anyone is a home machinist, and could make copies for me of these parts, that would work too! My parts are in rough shape though and would be poor patterns for making new ones.

I'm at a loss as to what to do here because I do not want to lose the triggers when a few parts will make them work properly. Right now they all either release when closing the bolt or make the bolt extremely hard to rotate. If you know anyone that might have parts for the older Anschutz rifles, let me know who they are and I can contact them.

Thanks in advance for your help,

Jim

 

[rodstreet]

Any of these look correct ?

 

[Hi-NV Shooter]

I hope I'm posting this in the right section. I have a couple of Anschutz early 14xx triggers that need repair or a rebuild. I'm looking for all parts for the Anschutz 1411-U2, the 1407-U8 (I hope that is the correct number) and the 1407-U9. Definitely need the bell shaped adjusting screw #85, the catch link #88, the catch # 101. Also need the cross pins for the whole assembly. All these parts numbers are from the Anschutz schematic and owners instructions that come with the 1400 series match 54 rifles.

These triggers were bought used and are pretty tired. If anyone is a home machinist, and could make copies for me of these parts, that would work too! My parts are in rough shape though and would be poor patterns for making new ones.

I'm at a loss as to what to do here because I do not want to lose the triggers when a few parts will make them work properly. Right now they all either release when closing the bolt or make the bolt extremely hard to rotate. If you know anyone that might have parts for the older Anschutz rifles, let me know who they are and I can contact them.

Thanks in advance for your help,

Jim

Try Gun parts Corp ( Numrich) they have the catch and catch link

Lee

 

[epoletna]

Oh boy. I have an Annie trigger somewhere. But I moved and haven't dug through all the bits and pieces I have. Let me go look and see if I can find it.

 

[1Merlin]

International Shooters Service​

Neil Stepp


2319 E. Loop 820 N., Fort Worth, Texas 76118-7103 Telephone 817-595-2090 Competition Air Rifles/Pistols, Rifle/Pistol Sights, Rifle/Pistol Grips, Shooting ...

 

[epoletna]

Just looked where I thought it might be and didn't find it. I'll keep looking. y the time I find it you probably won't need it any longer, but I'll keep looking.

 

[wk4036]

Yep try ISS