Remington 700 actions recommended smiths

[gamc]

Gentlemen I have 3 Remington 700 shot actions I need trued/blueprinted.
Before we go any further let me ask please do not respond with the merits of custom action both engineering wise and cost effectiveness of same.
I have appx.40 years of rifle shooting under my belt ranging from Mil professional, competition and recreational. I am well versed in the above option and don't disagree. I have definitive reasons for using these actions with project builds I am doing.

What I am looking for is lessor " known smiths that do top shelf work on 700's that true,time the action.if needed ,install bolt knobs and enlarge scope base threads to 8-40 in 60 days give or take 60- 90 days per action whether it be one at a time or gang work on all.
If turn around is in those parameters with competitive pricing I will furnish reamers and new barrels for fitting.
Guys I am trying to tap into the vast knowledge pool networking reach of this forum.
I will start off with a guy referenced by Hart barrels, Diamond T rifle shop in Colorado.

Respectfully gamc

 

[Hal]

LRI Long Rifles Inc.
Give Chad a call. Top quality work. You’ll have to check with him on ETA and price.

Hal

 

[gamc]

Thanks

 

[Fast14riot]

Something you can do in the mean time, send bolts out to have primary extraction timed and bolt handle welded by Accu-Tig.

 

[gamc]

Something you can do in the mean time, send bolts out to have primary extraction timed and bolt handle welded by Accu-Tig.

Good point

 

[LVLAaron]

Building M40 clones?

 

[LuvDog]

I’d say LRI too. Their turn around times vary but give them a call and ask. They are the best at providing status updates too.

 

[philip brousseau]

Building M40 clones?

Sounds like it, doesn't it. I guess I prefer 700s. I have a couple Gre Tan trued that are really nice. If I were to buy a custom it would be a Borden.

 

[boltfluter]

Why not our own at Wheeler Accuracy. Not sure what his work load is like but he is certainly qualified to do a first rate job.
Paul

 

[ShtrRdy]

Something you can do in the mean time, send bolts out to have primary extraction timed and bolt handle welded by Accu-Tig.

I believe the process of squaring things up takes a little off the back of the bolt lugs and off the action abutment so the bolt handle would have to be repositioned to restore primary extraction.

 

[gamc]

Not M40's but USMC style guns that I saw or used.

 

[pertnear]

Give Mark Pharr at Tumbleweeds a call. His work is impeccable & his prices fair.

Tumbleweeds Custom Rifles

 

[pertnear]

I will start off with a guy referenced by Hart barrels, Diamond T rifle shop in Colorado.

Also based on a recommendation by Hart, I had a barrel re-contoured, chambered & fitted by Diamond T. His work was excellent & done in about 5 weeks. Shawn was easy to deal with - located in IDAHO.

Shawn Thomason of Diamond T Rifle Shop in Craigmont,ID

 

[Kracken McGraw]

Gentlemen I have 3 Remington 700 shot actions I need trued/blueprinted.
Before we go any further let me ask please do not respond with the merits of custom action both engineering wise and cost effectiveness of same.
I have appx.40 years of rifle shooting under my belt ranging from Mil professional, competition and recreational. I am well versed in the above option and don't disagree. I have definitive reasons for using these actions with project builds I am doing.

What I am looking for is lessor " known smiths that do top shelf work on 700's that true,time the action.if needed ,install bolt knobs and enlarge scope base threads to 8-40 in 60 days give or take 60- 90 days per action whether it be one at a time or gang work on all.
If turn around is in those parameters with competitive pricing I will furnish reamers and new barrels for fitting.
Guys I am trying to tap into the vast knowledge pool networking reach of this forum.
I will start off with a guy referenced by Hart barrels, Diamond T rifle shop in Colorado.

Respectfully gamc

Bryant Customs also has been doing them for a long time.

 

[gamc]

Thank you gentleman