jackieschmidt
Gold $$ Contributor
I know this is the Competition Forum, but I finally completed the HBR Rifle based on the beautiful blue stock that Ed Bernabeo won at last years NBRSA Score Nationals.
It’s a late model Remington RR action with a side bolt release, PTG bolt with Speedy Shroud, 1/16 firing pin, I trued the threads and action face with the bolt way. The aluminum picatinny rail is mounted with 8-40 Torx screws. The barrel is a 1-17 Bartlien cut to 22 1/4 inches in length with the “standard” zero free bore .330 neck 30 BR chamber. I cut the barrel far enough down the taper to allow for 25+
ounces of rings and scope. With the limited number of the old super lite HBR scopes out there, this is something to consider.
I do not build rifles to sell, but since neither Ed or I shoot HBR, We kinda made it a project since he had the stock.


Any thoughts on what we should ask for this?
It’s a late model Remington RR action with a side bolt release, PTG bolt with Speedy Shroud, 1/16 firing pin, I trued the threads and action face with the bolt way. The aluminum picatinny rail is mounted with 8-40 Torx screws. The barrel is a 1-17 Bartlien cut to 22 1/4 inches in length with the “standard” zero free bore .330 neck 30 BR chamber. I cut the barrel far enough down the taper to allow for 25+
ounces of rings and scope. With the limited number of the old super lite HBR scopes out there, this is something to consider.I do not build rifles to sell, but since neither Ed or I shoot HBR, We kinda made it a project since he had the stock.



Any thoughts on what we should ask for this?
Last edited:









