• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

SHOUT OUT TO BART & WSMNUT

Bill Norris said:
Went over to my buddie SVT_Tactical's house a bit ago and shot a little bit. Shot this 5-shot gp. at 300 yds. with my custom build ODCR Rem 700 30BR using Bart's 118 gr. match bullets. Kudos to Bart for making a great bullet and to my Builder (WSMNUT) for a great shooting rifle.

Load was
Lapua brass

118 GR. BARTS FB HP HBN C 1.580 O M 2.261 COL T/L B S .269 B C .330
POWDER H-4198 34.2 GR. PRIMER CCI BR-4 .322 BUSHING
SEATED @ 1.600 O M 2.281 COL .020 JAM E C V2 Tuner Set -32.5-
Avg. 3025 FPS 12 E S 4 S D

This load has performed flawlessly in my rifle consistently at 100 yds.
Click to expand...
what length is your bbl,,,,,,Roger
 
ELR LVR said:
Very Impressive, dang that caliber is looking better all the time
Have you ever tried it at 600?
Wondering if it will hold as well as a 6br at that distance?
Click to expand...
The 30BR would be out of horse power at that distance. The bullet is short and flat based as well so I'm not too certain it would play well out that far.

EDIT: My 600 yd. rifle is a 6BRX built by ODCR as well. It normally shoots really well too. Won me first place in group back in Dec. at Rattlesnake here in N C. My buddy SVT_Tactical won first place in score at that match shooting a 6BRX built by ODCR as well.
 
Last edited:
Pic of the rifle and specs. NOTICE Paint by the Wizard himself Bcz (Brett)

REM 700 30BR ODCR CUSTOM BUILD

ACTION - Blue Printed S S Stainless
BOLT - Spiral Fluted w/custom knob PTG Firing Pin Assembly w/Tubb Duo-Springs
CHAMBER - 30BR -0- Free bore .330 turn neck
BARREL - 23 " Lilja 1 - 17 Twist, Threaded 5/8 X 24 E C V-2 Tuner
LUG - PTG .2285 Tapered
STOCK - Revolution BR 3 inch fore arm bedded - Zack Cobalt Blue Paint - Brett C.
TRIGGER - Jewell BR w/bolt rel. and safety "C" Spring installed
SCOPE - Athlon 10 X 40 X 56mm 1/8 MOA -0- MOA Base
 

Attachments

  • 20250404_214922.jpg
    20250404_214922.jpg
    450.7 KB · Views: 50
Bill Norris said:
Pic of the rifle and specs. NOTICE Paint by the Wizard himself Bcz (Brett)

REM 700 30BR ODCR CUSTOM BUILD

ACTION - Blue Printed S S Stainless
BOLT - Spiral Fluted w/custom knob PTG Firing Pin Assembly w/Tubb Duo-Springs
CHAMBER - 30BR -0- Free bore .330 turn neck
BARREL - 23 " Lilja 1 - 17 Twist, Threaded 5/8 X 24 E C V-2 Tuner
LUG - PTG .2285 Tapered
STOCK - Revolution BR 3 inch fore arm bedded - Zack Cobalt Blue Paint - Brett C.
TRIGGER - Jewell BR w/bolt rel. and safety "C" Spring installed
SCOPE - Athlon 10 X 40 X 56mm 1/8 MOA -0- MOA Base
Click to expand...
What the hell!??…. Did Brett paint that with Krylon?….. just kidding buddy that rifle is as beautiful as it shoots!… nice having good buddies like SVT and bcz for sure!… nice when it all comes together like it did for you today! I’m really happy for ya
Wayne
 
bozo699 said:
What the hell!??…. Did Brett paint that with Krylon?….. just kidding buddy that rifle is as beautiful as it shoots!… nice having good buddies like SVT and bcz for sure!… nice when it all comes together like it did for you today! I’m really happy for ya
Wayne
Click to expand...
Thank you Bro. Blessed to have it all and all the friends that do great work
I could not be more content.
 
Sweet group!
30 Br's are the best! They are also the least finicky round to load for that I know of.
Mine will run with my PPC's, just a little rough in a LV rifle over the course of a 10 card match.
I built mine to run as a HV/Score rifle and that extra 3 lbs helps a lot.
Yeh I know I'm a sissy, I use to get told that a lot by the guys who shot full load .308's in a Hunter rifle. LOL
Matter of fact I am going to put it back in it's vintage Lee Six stock that arrived today from my friend Brett who turned it into a Columbian Emerald for me and go shoot it at the Chabot tomorrow.
G
 
Greg@wfcustom said:
Sweet group!
30 Br's are the best! They are also the least finicky round to load for that I know of.
Mine will run with my PPC's, just a little rough in a LV rifle over the course of a 10 card match.
I built mine to run as a HV/Score rifle and that extra 3 lbs helps a lot.
Yeh I know I'm a sissy, I use to get told that a lot by the guys who shot full load .308's in a Hunter rifle. LOL
Matter of fact I am going to put it back in it's vintage Lee Six stock that arrived today from my friend Brett who turned it into a Columbian Emerald for me and go shoot it at the Chabot tomorrow.
G
Click to expand...
Sounds like a very nice rig. Bretts paint always makes them look fantastic.
 
You must log in or register to reply here.

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Classified Ads

Forum statistics

Threads
165,800
Messages
2,203,303
Members
79,110
Latest member
miles813

Share This Page

Back
Top