WTB Kelbly Panda/Kodiak/Grizzly barrel

[bassnbrass]

Searching for a new barrel for a Kelbly Panda/Kodiak/Grizzly/Black Bear.
These all should share a tenon from what i understand.
Ideally looking for something using a .308 Flat bolt face.
Open to options new or used.
Post up or PM me what you have and a price, Thanks all.

 

[Bullwinklelol]

Are you looking for coned, or flat, looking for a straight or lighter barrel. 6.5prc is a mag bolt face

 

[SilhouetteShooter]

Searching for a new or new to you?

 

[wvlongshot]

Interested in a 6.5x284 barrel for cone bolt?

 

[1885Winman4590]

I have two kreiger 30 x 47 barrels that are decent shape and shoot very well Also have quite a bit of brass and dies. One is 14 twist, the other is 15 twist. The 14 twist shoots very well w/ 110's thru 125's. Haven't tried the 15. Make me an offer, you might be surprised.
Bob

 

[bassnbrass]

To clarify with the above comments, I have a flat bolt .308 face currently.
If I found a deal on a 6.5prc barrel I would consider purchasing a second bolt to run that caliber.
I am mostly looking for a heavier contour barrel and would consider both new or used with life left.

 

[Toms]

Searching for a new barrel for a Kelbly Panda/Kodiak/Grizzly/Black Bear.
These all should share a tenon from what i understand.
Ideally looking for something using a .308 bolt face. Open to options and would be very interested in a 6.5PRC barrel.
Post up or PM me what you have and a price, Thanks all.

I have a 6.5x284 Krieger hv coned bolt I would sell. Trying to send pm but won't send. Toms. 307 three four 9 one 5 7 eight.

 

[G7BC]

Panda Complete Bolt with Tilted TG Ejector .308 Cone Boltface

<p>Panda Complete Bolt with Tilted TG Ejector .308 Cone Boltface</p>

www.driftersgear.com

These guys have a coned .308 bolt in stock should you decide to go that route. They sometimes have magnum bolts. Have bought from them before and they are good to go.
Kelbly's can make you a bolt also if you don't mind waiting a bit.

 

[bassnbrass]

I have two kreiger 30 x 47 barrels that are decent shape and shoot very well Also have quite a bit of brass and dies. One is 14 twist, the other is 15 twist. The 14 twist shoots very well w/ 110's thru 125's. Haven't tried the 15. Make me an offer, you might be surprised.
Bob

Are these set up for flat bolt or coned?

 

[bassnbrass]

Bump to top, still looking.