SELLING 6x45 Remington

[Jim Hankins]

Remington Mohawk action with 700 bolt handle,24" x caliber 1-8" bbl.,McMillan stock,Timney trigger@1#14 oz.,Burris rings and bases,unknown custom bolt release and a Douglas 1-14 .223 bbl. that is unfired. Both barrels are stainless and .600" at the muzzle.Both barrels chambered and fitted by the late Butch Hongisto. When I had him fit the barrels I was trying to decide between 6x45 and 6x47. We decided on 6x45,but Butch stamped the bbl.6x47.Killed a couple of deer with 85 gr.Sierras. Loves some 62 grain Pindell bullets I tried.Less than 100 rounds fired.Has single shot sled with all of the internal magazine parts included. Scope and sling not included.Weighs app.8 lbs.w/o scope and sling.Selling because I plan to build a Tikka 6x45. 1400.00 firm+shipping in CONUS.

 

[roband]

Off topic but.....Whos going to do your Tikka build?

 

[jobhopper66]

A very well done build and a very clever use of that leaf in picture #2.

 

[Jim Hankins]

Off topic but.....Whos going to do your Tikka build?

Haven't figured that out yet...

 

[Jim Hankins]

Btt,also has m 16 (I think) extractor

 

[NDSU]

Great rig and caliber. Have a 6X45 on a Rem 700 action and Grayboe stock. Perfect farm deer caliber

 

[NDSU]

My most recent buck taken with the 6X45. 85gr Partition.

 

[NDSU]

Don’t mean to step on your ad but anyone looking for a medium range, easy to load for caliber needs to look at your rifle.

 

[Jim Hankins]

Don’t mean to step on your ad but anyone looking for a medium range, easy to load for caliber needs to look at your rifle.

Thanks! Probably the easiest cartridge I have ever loaded for, plus a lot of milage out of a little powder. I plan to build another shorter 6x45 on a SS Tikka action for my idea of a perfect truck gun.

 

[nakneker]

Neat rifle. I have one built on a 788, shoots everything well. Someone will end up with a fun rifle, good luck with your listing!

 

[snert]

Jim, where are yo located (state)?

 

[Jim Hankins]

Jim, where are yo located (state)?

S.E. Indiana.

 

[20VarTarg]

Hey Jim, real quick question. Have you ever used the internal magazine parts to shoot this rifle as a repeater? If not do you think it can be set up as a repeater? Also is the .223 barrel also stainless and 24"

 

[Jim Hankins]

Have not shot or tried as a repeater, but the follower and spring are there. Had SS trough when I got it . Both barrels are the same, I think actually 23.5. When I got the gun it had a19" .22x35 bbl on it, which is basically a .222 shortened. I have that bbl also.

 

[painter]

Hey Jim, real quick question. Have you ever used the internal magazine parts to shoot this rifle as a repeater? If not do you think it can be set up as a repeater? Also is the .223 barrel also stainless and 24"

I used a 308 box with a filler block in the rear with a 223 follower works very well, I used a piece of sheet steel to form the spacer mig weld and tacked it in place. this is a Rem 700 action

 

[WayneShaw]

I chambered one for an AR. Used standard magazines and it feeds perfect.

 

[Jim Hankins]

Btt- super accurate and low recoil..

 

[Jim Hankins]

Btt

 

[wildcatter]

It comes with both barrels??

PM sent

 

[Jim Hankins]

It comes with both barrels??

PM sent

Yes.