SOLD Hs precision stock savage 4.40

[BuffaloGunner]

Selling a HS precision stock for a savage short action 4.40 spacing. Black. Two sling studs in front one in rear. I have a top bolt release action I was going to use it in but going a different direction. May work in a bottom bolt release but I’m not sure on that. Includes bottom metal. No magazine or action screws included.

Unsure of the model number but going off their website it seems to be of the pst family. I believe it may have came off a savage lrp but unsure.

Has a few scuffs. But nothing too bad.

Will gladly send photos to interested parties.

$350 buyer pays shipping

Bipod not included

 

[BuffaloGunner]

Bumb

 

[spartan_gunner86]

Do you know the barrel channel diameter?

 

[DLT]

Do you know the barrel channel diameter?

if it’s off a lrp rifle, the barrels were 1” at the muzzle

 

[BuffaloGunner]

Do you know the barrel channel diameter?

I believe it came off a lrp. So yea probably 1 inch at the muzzle. Could get some measurements for you later on if you’d like

 

[spartan_gunner86]

I believe it came off a lrp. So yea probably 1 inch at the muzzle. Could get some measurements for you later on if you’d like

Yes please

 

[Willoughby]

pretty sure its from a FCP model -

 

[DLT]

You guys are both wrong. It is a singe shot 3 screw LRPV stock target action stock. Either 4.4 or 3.4 screw spacing.

I learned something if it is a lrpv. I did not think those stocks had the drop down grip. Better pictures would solve. LRP rifles were mag/clip fed. LRPV rifleswere single shot and stainless

 

[BuffaloGunner]

You guys are both wrong. It is a singe shot 3 screw LRPV stock target action stock. Either 4.4 or 3.4 screw spacing.

It takes magazines. 4.4 spacing

 

[BuffaloGunner]

One look and you can see it is solid no magazine.

I own the stock. I’m the one selling the stock. It takes magazines. Trust me on this one

 

[hogpatrol]

Free bump. IIRC, this will fit a Savage MLII smokeless muzzle loader and are VERY hard to find to fit that rifle.

 

[Jcav]

Russ, you're wrong on this one. The stock is a LRP stock not a LRPV stock. I have 2 of these stocks myself.
BuffaloGunner is 100% correct. They are mag fed stock with a bottom metal.

 

[Willoughby]

I didnt realize it was a single shot stock- I have 2 fcp models with this style stock on them and both are repeaters -glwts

 

[BuffaloGunner]

It is NOT a single shot stock. I repeat NOT a single shot

 

[k80skeet]

Russ, you're wrong on this one. The stock is a LRP stock not a LRPV stock. I have 2 of these stocks myself.
BuffaloGunner is 100% correct. They are mag fed stock with a bottom metal.

I was looking at the stock MarkT had and thought this was the same add.

 

[BuffaloGunner]

SPF