SOLD 6MM BR Norma Reamer RENTAL

[jcm24m]

I just bought a 6MM BR Norma rifle with a .262” neck that I want to use ONLY for prairie dogging. I don’t want to turn the necks to .262”, too much waste of brass. I want to just skim the necks to true them up. I would like to find a reamer to RENT to just open the neck to .268” - .270”. Let me know by a PM of what you might have to rent.

 

[k80skeet]

I just bought a 6MM BR Norma rifle with a .262” neck that I want to use ONLY for prairie dogging. I don’t want to turn the necks to .262”, too much waste of brass. I want to just skim the necks to true them up. I would like to find a reamer to RENT to just open the neck to .268” - .270”. Let me know by a PM of what you might have to rent.

 

[SilhouetteShooter]

Who is the reamer maker?? How much do you want for it shipped??

I believe he is asking to rent a reamer to open his barrel.

 

[RoyinNC]

I have a .270

 

[varminthunter1]

Usually freebore is as important, do you have a bullet in mind? Or a desired freebore?

 

[jcm24m]

I will be using bullets from 58 grain VMAX up to 68 grain bullets with 14-twist barrel. So I’m looking for a very short freebore and a .268-.270” neck. Hope this clarifies what I’m looking for.

 

[k80skeet]

I will be using bullets from 58 grain VMAX up to 68 grain bullets with 14-twist barrel. So I’m looking for a very short freebore and a .268-.270” neck. Hope this clarifies what I’m looking for.

Anything from 0 to .40 freebore should do you just fine.

 

[jackieschmidt]

I have a .269 with a .060 freebore, works great with any 65/68 grn Benchrest Bullet.
I also have a no neck turn, I think it is around a .060 freebore.

 

[Skattergun]

.272 neck .089 freebore
Not sure it’s what you’re after but it’s available, I load 65vmax touching with a case full of ar comp

 

[jcm24m]

Found a reamer, thanks everyone