6br Peterson Brass

[pdog06]

 

[urbanrifleman]

View attachment 1482565

Thank you so much sir.

 

[Fuj]

Looking at them pics.....Blow that Peterson brass out to BRX length.
I know it would be using up resources, but make a mule barrel to do
all the work.

 

[Idaho-Lefty]

Notice the "TouchHole's",. wall Thickness above, the Primer !!!
Wow,.. that's gotta be GREAT for, Primer Pockets,.. staying,.. TIGHT !
Love my Peterson, 6.5 Creed Brass !

 

[urbanrifleman]

Notice the "TouchHole's",. wall Thickness above, the Primer !!!
Wow,.. that's gotta be GREAT for, Primer Pockets,.. staying,.. TIGHT !
Love my Peterson, 6.5 Creed Brass !

Yah, you should be able to step on those.

 

[pdog06]

Noticing the differences between the Norma Br and Dasher, I wonder if the Peterson BR cutaway looks similar to the Peterson Dasher?. Would like to see a cutaway of the BR to compare.

 

[Andy Work]

Peterson 6BR:

 

[Dgd6mm]

Peterson 6BR:

View attachment 1482825

Nice

 

[Fuj]

I'm thinking of putting in a supply of Peterson wild cat tubes.

 

[dusterdave173]

I just got 150 6BR and have weighed them--I am very satisfied so far--waiting on some dies --going to Bluecollar tomorrow to get some bullets--they look fine so far

 

[Bill Norris]

I just got 150 6BR and have weighed them--I am very satisfied so far--waiting on some dies --going to Bluecollar tomorrow to get some bullets--they look fine so far

Comparing the weight of my 30BR 100 pcs. of Peterson brass vs. my 100 pcs. of Lapua brass the difference is small. Peterson 128.4 - 129.5 gr. Lapua 125.2 - 126.9 gr.

 

[BartsBullets]

Just got around to shooting some of the Peterson brass in my 6BRA. Hit it twice firerforming and started practicing with it. It appears to be at least every bit as good as the Lapua if not better. Measured the necks at .013 plenty of room with my .272 chamber.

Bart

 

[dusterdave173]

I have 6BR Peterson . Twice fired now
It is Very close in all specs to the Lapua after firing
So far so good--
Actually got some 87 Vmax to shoot today--N135 was the ticket
So far I am liking the Peterson--and at under $70 compared to what folks want for Lapua it is looking really really good. At this point I don't think I can shoot the diff

 

[ARW]

I'm glad I got my 150 pieces of the Peterson 6BR brass when I did before the word gets out on just how good this brass actually is and it gets scarfed up.

 

[urbanrifleman]

I have 6BR Peterson . Twice fired now
It is Very close in all specs to the Lapua after firing
So far so good--
Actually got some 87 Vmax to shoot today--N135 was the ticket
So far I am liking the Peterson--and at under $70 compared to what folks want for Lapua it is looking really really good. At this point I don't think I can shoot the diff

What was the load? How much bullet jump?

 

[AlNyhus]

I have 6BR Peterson . Twice fired now
It is Very close in all specs to the Lapua after firing
So far so good--
Actually got some 87 Vmax to shoot today--N135 was the ticket

N135 and the 87 VMax has always been a solid combo in the 6BR.

Good shootin' -Al

 

[USMCDOC]

Gordon's Reloading Tools is telling me to use the same load i used in the Alpha brass in my Lapua brass.. if i can get a chance.. i will try to confirm that in the next few days

 

[urbanrifleman]

N135 and the 87 VMax has always been a solid combo in the 6BR.

Good shootin' -Al

What was your load and how much do you jump that bullet?

 

[farmerjohn]

I've been using it for two years now in my BRA and my 6CM both SRP. Went to it in small batches at first just because it was made in the USA. After trying it IMHO it's every bit as good as Lapua if not better, I buy it in the bulk 500 bags from Grad .....
John

 

[Ranger188]

I've been using it for two years now in my BRA and my 6CM both SRP. Went to it in small batches at first just because it was made in the USA. After trying it IMHO it's every bit as good as Lapua if not better, I buy it in the bulk 500 bags from Grad .....View attachment 1489486
John

Are you using it in a "no turn" chamber?
If not, do you find the necks are a bit thicker and need to be turned
a little bit more to fit a custom chamber?