Bag Rider

[Gary C]

There is a three inch front bag rider available on the Urbanrifleman website however
It is listed as fitting a Savage BVSS stock.
I have a Savage LRPV and wondering if it will fit that?

G

 

[urbanrifleman]

There is a three inch front bag rider available on the Urbanrifleman website however
It is listed as fitting a Savage BVSS stock.
I have a Savage LRPV and wondering if it will fit that?

G

It can probably be made to fit with modifications, or it might drop right on, but that's not it was made for. The BVSS bag Rider works very well as a basic kit for any stock that's pretty conventional and about 2 in wide. You can always open it up and bed it to your stock. It would not be a major project. But I don't make any guarantees.

 

[Mark W]

There is a three inch front bag rider available on the Urbanrifleman website however
It is listed as fitting a Savage BVSS stock.
I have a Savage LRPV and wondering if it will fit that?

G

I just happen to have one of Bradley’s BVSS 3” bag riders and I also have an lrvp stock that I can check the fit and let you know. I should be able to check it out sometime this weekend and let you know.

 

[1911nut]

I had a LRPV I put a second sling stud insert for a pic rail then used this bag rider.

EGW AR Bag Rider For Picatinny

Enhance your AR's stability with the EGW Picatinny Bag Rider. Crafted from durable delrin plastic, it seamlessly mounts to your picatinny rail for precision shooting.

www.egwguns.com

I used this pic rail

BT17: 4" 1913 Picatinny Rail | B&T Industries

Shop and configure a BT17: 4" 1913 Picatinny Rail from B&T Industries.

shop.accu-shot.com

I can switch between the bag rider and my Atlas bipod in a minute.

 

[Gary C]

Mark,
That will be great.
THX

 

[marchx]

they don't ship to Europe.

 

[urbanrifleman]

I had a LRPV I put a second sling stud insert for a pic rail then used this bag rider.

View attachment 1468037

EGW AR Bag Rider For Picatinny

Enhance your AR's stability with the EGW Picatinny Bag Rider. Crafted from durable delrin plastic, it seamlessly mounts to your picatinny rail for precision shooting.

www.egwguns.com

I used this pic rail

BT17: 4" 1913 Picatinny Rail | B&T Industries

Shop and configure a BT17: 4" 1913 Picatinny Rail from B&T Industries.

shop.accu-shot.com

I can switch between the bag rider and my Atlas bipod in a minute.

I like mine better.

3 INCH BENCHREST PICATINNY FRONT BAG RIDER

Precision Rifle Shooting Accessories

theurbanriflemanstore.com

 

[topclass2017]

I like mine better.

3 INCH BENCHREST PICATINNY FRONT BAG RIDER

Precision Rifle Shooting Accessories

theurbanriflemanstore.com

+1. I use one of these. Works very well

 

[Mark W]

Mark,
That will be great.
THX

Gary, I’m sorry for the delay! My memory doesn’t work like it used to….lol.
I was able to confirm that the BVSS bag rider will lot fit the LRVP stock without modification.

I actually have two of these bag riders because the first one didn’t fit my BVSS stock perfectly and Bradley made me another one. If you want to try modifying it to work on your LRVP, just PM me your address and I’ll send it your way.

Mark

 

[urbanrifleman]

Gary, I’m sorry for the delay! My memory doesn’t work like it used to….lol.
I was able to confirm that the BVSS bag rider will lot fit the LRVP stock without modification.

I actually have two of these bag riders because the first one didn’t fit my BVSS stock perfectly and Bradley made me another one. If you want to try modifying it to work on your LRVP, just PM me your address and I’ll send it your way.

Mark

Easily can be bedded to a shape.

 

[Mark W]

Easily can be bedded to a shape.

It’s actually going to need a little material removed and then maybe a little bedding in the corners. The BVSS is kinda square and the LRVP is a little wider and more round.

 

[Gary C]

Thanks Mark,