Stock Inletters - Borden BRMXD 3D Print

[GT Accuracy]

I recently printed about 25 BRMXD full scale models for quick reference when doing inletting work. Nothing is worse than dropping or banging an action when going in and out of a stock during inlet. They have a right port, lug, and bolt notch. Only thing it's missing is the bolt release.

If you want one - let me know. Asking $25 + Shipping

Due to some of these not fitting in a small flat rate box - I have to start charging for shipping.

 

[urbanrifleman]

I recently printed about 25 BRMXD full scale models for quick reference when doing inletting work. Nothing is worse than dropping or banging an action when going in and out of a stock during inlet. They have a right port, lug, and bolt notch. Only thing it's missing is the bolt release.

If you want one - let me know. Asking $25 shipped

What CAD are you using?

 

[AlNyhus]

Greg, that's a wonderful idea and a much needed tool, especially since getting stocks inletted has become more difficult.

Any Panda prints coming (hope, hope, hope)?

 

[GT Accuracy]

What CAD are you using?

Bordens

 

[GT Accuracy]

Greg, that's a wonderful idea and a much needed tool, especially since getting stocks inletted has become more difficult.

Any Panda prints coming (hope, hope, hope)?

I could draw up a panda if there is a need

 

[GT Accuracy]

Here is what one looks like

 

[LVLAaron]

Brilliant

 

[gunsandgunsmithing]

I think it's a great idea Greg. I'd take one in just about any configuration you'll do. I'd start with Borden BR, BRM, BRMXD, Bat DS, Bat M and a Panda...if you'll do them. Let me know what and when and how you want payment. --Mike

 

[GT Accuracy]

Greg, that's a wonderful idea and a much needed tool, especially since getting stocks inletted has become more difficult.

Any Panda prints coming (hope, hope, hope)?

AL,

Give me a week or so, I just started mapping / cad'ing a Golden Bear and Panda. But i'll get some ready for you.

 

[GT Accuracy]

I think it's a great idea Greg. I'd take one in just about any configuration you'll do. I'd start with Borden BR, BRM, BRMXD, Bat DS, Bat M and a Panda...if you'll do them. Let me know what and when and how you want payment. --Mike

I can get started on the rest of the borden and bat's this week as well. Is your bat M the older bottom lug one or the new front lug ?

 

[gunsandgunsmithing]

I can get started on the rest of the borden and bat's this week as well. Is your bat M the older bottom lug one or the new front lug ?

Excuse my ignorance. It's not mine and I didn't remember it having a lug. Lets just skip that one for now, until I know for sure. I think I'd be ok with no lug and I could address that as needed. Thanks!

 

[GT Accuracy]

Excuse my ignorance. It's not mine and I didn't remember it having a lug. Lets just skip that one for now, until I know for sure. I think I'd be ok with no lug and I could address that as needed. Thanks!

No problem. I can make it without a lug anywhere if you're just wanting body and tang shape

 

[gunsandgunsmithing]

No problem. I can make it without a lug anywhere if you're just wanting body and tang shape

Yes, that's what I'm thinking, exactly. Go ahead and do that if you can. I can work with it.

 

[LVLAaron]

I have one(BatM)with the bolt on buttom lug if you want measurements

 

[GT Accuracy]

I have one(BatM)with the bolt on buttom lug if you want measurements

Thanks...I got the dims. Just need to build the cad

 

[Dusty Stevens]

Making aics bottom metal fitting blanks would be very good too

 

[GT Accuracy]

Making aics bottom metal fitting blanks would be very good too

Hawkins M5 - got one here I just popped off the sheet

 

[RGRobinett]

Is Stiller Viper/Diamondback same foot-print as Panda? RG

 

[gunsandgunsmithing]

No problem. I can make it without a lug anywhere if you're just wanting body and tang shape

No rush..just haven't heard back from ya. Are you gonna do the ones we talked about? Just let me know how and when you want payment. Thanks Greg!--Mike

If you need me to msg or email or whatever, I can do that. I know I have a hard time keeping up with orders placed different places at times. I like them to all come in the same form when I can. So many forms of communication these days things can fall through a crack sometimes...the one between my ears usually. Lol!

 

[GT Accuracy]

No rush..just haven't heard back from ya. Are you gonna do the ones we talked about? Just let me know how and when you want payment. Thanks Greg!--Mike

If you need me to msg or email or whatever, I can do that. I know I have a hard time keeping up with orders placed different places at times. I like them to all come in the same form when I can.

Yup, I just got busy and I’m traveling now.

I am also adding some to the website. They take a while to print. Little buggers