Bergara barrel bushing

[Westex]

Here is bushing I made for one of my Bergaras so I could put new Shilen straight .900 barrel on action . Metric threads on outter dia and 16tpi on inner 3/4 x16 tpi

 

[Dusty Stevens]

Perfect! Thatll solve that issue

 

[whatsupdoc]

Is that for the rimfire?

 

[Westex]

Yes !

 

[xswanted]

Here is bushing I made for one of my Bergaras so I could put new Shilen straight .900 barrel on action . Metric threads on outter dia and 16tpi on inner 3/4 x16 tpi

Can you get pics up for the finished product as well?

 

[Westex]

here it is

 

[GerryinPa]

Excellent work! let me ask, was that done single point or did you use an insert? I'm asking because I ordered the metric tap and die set for the Bergara barrels and I'm curious, thanks
Gerry

 

[Westex]

Single point on outer bushing Tap 3/4x16tpi inner threads . was going to single point inner threads but this was a test bushing and just going to see how it worked . made it from stainless barrel shank I cut off new barrel . used a 3/4 x16 bolt and double nut it to bushing to install and then fit and torque barrel .