• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

Primer pocket depth?

MTGunner

What is the consensus of the ideal primer pocket depth for 260 and/or 7MM Remington Magnum? I find that some of my primers are not flush with the rim. MTG
 
GLShooter said:
They aren't supposed to be flush. They should be sunk 0.002.

Greg
Click to expand...
At least. I have all of my brass set up at .004” under flush. My pocket uniforming tool is set to .1245”
Dave
 
Last edited:
I'm new to precision reloading. Here's what Ive found reloading my 6.5PRC. Nosler Brass ALWAYS needed the primer pocket trimmed. I finally got 200 pieces of Lapua and every single pocket was perfect. As others have stated the primer should be lower than flush...just.
Also, measure the pocket depth and the primer thickness. Poor seating can also be your primer seater. I use the Lee bench mounter primer seater and it works much, much better than my RCBS bench mounted.
 
My primers measure .125..My Lapua Palma primer pockets are .130
and I seat with .001 to ..002 crush...or .005 to .006 deep from flush.
Works well for me at distance. YMMV
 
I'm not nearly as scientific as the shooters/reloaders here. I use a non-adjustable pocket uniformer from Sinclair on all of my brass. I seat primers until I feel them touch the bottom of the pocket. Easy peasy, but I don't compete against anyone other than myself.
 
Lapua pockets aren't . 120.
I have found some approaching .124+ virgin. Be tough to uniform at .120 across 50, imo.
 
My Lapua pockets are .126
my primers including anvil .122 Ish..:)
I set them .009 below the case head with a .005 crush, and yes I weigh them also.
 
Last edited:
Sandstorm said:
What brass Dusty are you using for the .120 pockets..seems shallow to me.
Click to expand...
Why would the brand of brass matter if he told us he uniforms to .120”?? Seems like the correct question might be what primers he is using, right??
Dave
 
INTJ said:
Jim,

Your primers more likely vary something .120 to .124. This would put the crush all over the place.
Click to expand...
It’s all I got bro’ I start with feel and transfer to a number, what’s the difference between that and just feel only with any non pressure gage tool ?

Also I’m not saying to anyone I’m doing anything spectacular and certainly don’t take my word what’s the best rather go test for themselves and find out.

Damn sure don’t follow me.
 
Last edited:
SPJ said:
It’s all I got bro’ I start with feel and transfer to a number, what’s the difference between that and just feel only with any non pressure gage tool ?

Also I’m not saying to anyone I’m doing anything spectacular and certainly don’t take my word what’s the best rather go test for themselves and find out.

Damn sure don’t follow me.
Click to expand...

Start with feel and stay with feel, or else measure your primers and sort.
 
You must log in or register to reply here.

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Classified Ads

Forum statistics

Threads
165,804
Messages
2,203,349
Members
79,110
Latest member
miles813

Share This Page

Back
Top