Need 21st century priming tool help.

[ARW]

Just spoke with 21st Century and they are going to send me replacement parts that should take care of everything.

The comments above about them being totally supportive and committed to their product was 100% correct.

 

[Dave M.]

Just spoke with 21st Century and they are going to send me replacement parts that should take care of everything.

The comments above about them being totally supportive and committed to their product was 100% correct.

Pete is a great guy and super responsive and helpful.
Dave

 

[divingin]

wobble when placed on a flat surface??

Place a primed case base-down on a flat surface. A protruding primer doesn't allow the case head to sit flat, causing the wobble.

 

[Tesoro]

Place a primed case base-down on a flat surface. A protruding primer doesn't allow the case head to sit flat, causing the wobble.

I'll have to use the 'wobble test' from now on to check my primer seating depth!

 

[divingin]

I'll have to use the 'wobble test' from now on to check my primer seating depth!

Well, personally, I just look, and maybe run a finger over it.

 

[ARW]

The replacement parts Pete sent to me on Wednesday for my priming tool arrived today. Just two days from Indiana to Pennsylvania...Very impressed with 21st Century and the USPS.

I called Pete at 21st Century and let him know how much I appreciated all of his help and fast response.

I put the new parts on and I initially set the dial to 15 clicks up from 0, it was close to what I needed to fully seat the primers and I ended up on a setting of 10 clicks up, which is perfect in my opinion.

Thanks again to everyone for their input and suggestions and a BIG thank you again to Pete at 21st Century.

Alan

 

[Tesoro]

I'll have to use the 'wobble test' from now on to check my primer seating depth

Well, personally, I just look, and maybe run a finger over it.

I was being sarcastic!