Satern Powder Funnel

[danny]

The best funnels that I have found are the Precision Hardcore Gear, or the RW Hart.

Reloading items - Page 1 - Precision Hardcore Gear

precision-hardcore-gear.mybigcommerce.com

Hart Powder Funnel – RW Hart and Son

www.hartcustomrifles.com

Danny

 

[Woofie]

I have three Satern funnels: 50, 338 and 30. Only after the OP posted his pictures did I realize the 30, which I bought at Brunos about.. Oh, ten days ago. Otherwise they all work the same.... flawlessly.
Were I to have a problem with powder leakage -- I don't -- I would probably seal the offending area with a very thin application of UV-cured polymer.

 

[Ranger188]

@bozo699 I've been waiting on Precision Hardcore Gear to get the 30 cal. funnel back in stock.
Been 4+ months. That why I questioned where they are made.
Called awhile back and they said Dec. .....

 

[Chiquita]

No static with aluminum
Wayne

The dryer sheet will take care of the static on the plastic. Correct?

 

[Dusty Stevens]

The dryer sheet will take care of the static on the plastic. Correct?

Yes

 

[Dusty Stevens]

I wish i could trade my area419 funnel set with drop tube and tray for a set of hardcore gear funnels in the same calibers

 

[bozo699]

The dryer sheet will take care of the static on the plastic. Correct?

Yes sir it will
Wayne

 

[TheOtherZilla]

Bought a used one. The brass part loosened, Tried filling the gap, still worked loose. They may be ok for large stick powder but didn't work with ball.

Same happened here. Saturn said they'd replace it but nada. I now use Precision Powder funnels.

 

[Kracken McGraw]

The dryer sheet will take care of the static on the plastic. Correct?

The Forster blue ribbon funnel stated to wash the funnel in Dawn type dish soap, seemed to not have any problems.

 

[bozo699]

I wish i could trade my area419 funnel set with drop tube and tray for a set of hardcore gear funnels in the same calibers

I sure like mine
Wayne

 

[bozo699]

@bozo699 I've been waiting on Precision Hardcore Gear to get the 30 cal. funnel back in stock.
Been 4+ months. That why I questioned where they are made.
Called awhile back and they said Dec. .....

I’ll try to swing out there after work one day this week and see what’s up and try to get back to ya
Wayne

 

[Hohn]

I wish i could trade my area419 funnel set with drop tube and tray for a set of hardcore gear funnels in the same calibers

What’s the issue with the 419 funnels?

 

[Dusty Stevens]

What’s the issue with the 419 funnels?

Too heavy. They have to be held

 

[Ironman308]

I just give the funnel a tap with the powder pan.

 

[divingin]

Is anyone using the Lyman Brass Smith Pro Powder Funnel?

I have an Area 419 set and the Lyman set. I much prefer the Lyman (though the 419 looks better.)