6mmBRA handgun data needed

[DaveMac]

Hello all! First question I've ever asked but a longtime reader. I have a XP 100, 15 7/8 inch 1:8 Shilen, custom chassis and EC tuner all set up for 600 yard competition. I have Varget, H4895 and BLC2 among others. Bullets are 108 Bergers some 105 VLD's and Barts 105 Hammers. Should I just approach it as I would a rifle? Any load info or tips? Thank you for your time!

 

[LitLBoy]

Check on here with "seven fingers"

 

[7mmmag]

You can just use rifle data, I have 6mm BRX in mine with 15 inch barrel and run 107 SMK with 4895 . I won't be back until March to see what the data was for sure.

 

[rickiesrevenge]

Use rifle data. I've never had a BRAI in an XP but I've worn out a few dasher barrels on XP's.

 

[PBMAX]

I dabble in long range pistol myself. I've found that the powders toward the faster burn rates for caliber produce better velocities in the shorter barrel.

 

[Old Navy]

Hello all! First question I've ever asked but a longtime reader. I have a XP 100, 15 7/8 inch 1:8 Shilen, custom chassis and EC tuner all set up for 600 yard competition. I have Varget, H4895 and BLC2 among others. Bullets are 108 Bergers some 105 VLD's and Barts 105 Hammers. Should I just approach it as I would a rifle? Any load info or tips? Thank you for your time!

Yes.

 

[Sniper338]

Use rifle data. You may find the load goes a tad higher in powder grain weight than a rifle due to a shorter barrel. Mine do in several calibers. But same as a rifle, start low and watch for pressure signs. No different. Use the same powder your would for a rifle.