.900x32 Tuner

[praveen]

I'm looking for a .900x32 TPI tuner but so far I can't seem to find one. Every tuner that I've looked online seems to be .875x32.
If anybody knows a source for a .900x32 tuner, please let me know.

 

[hfinkle]

I think Ezell tuners come in that thread

 

[praveen]

I think Ezell tuners come in that thread

Not anymore. I just talked to Mike Ezell and he said he stopped making them in that spec about 2 years ago.

 

[Joseph Jones ctsr]

If you can't find one you can pm me, we can open the .875 up for you.

 

[praveen]

If you can't find one you can pm me, we can open the .875 up for you.

Thanks Joseph,
I haven't bought a tuner yet but if I can't find it at all, then I'll buy one from Ezell and send it to you for opening it up.

-Praveen

 

[carlsbad]

Pretty sure I have an Ezell tuner with that thread if that is what you are looking for. PM me.

 

[joshb]

I have a tuner in a drawer I bought a few years ago and never used. I’ll go check it. My memory says it’s an Ezell. First is the outside of threads. Second is inside of threads.

 

[praveen]

I have a tuner in a drawer I bought a few years ago and never used. I’ll go check it. My memory says it’s an Ezell.

Thanks Josh. Jerry is checking if he has one. If he doesn't, I'm going to PM you.

 

[carlsbad]

Yes, it's .900. I'll send you a pm.

 

[praveen]

Thanks guys. Tuner is found.

 

[Dusty Stevens]

I have one of the older .900 ezell tuners id trade for an .875 one

 

[Dusty Stevens]

I have a tuner in a drawer I bought a few years ago and never used. I’ll go check it. My memory says it’s an Ezell. First is the outside of threads. Second is inside of threads.View attachment 1227874View attachment 1227875View attachment 1227876

What kind of tuner is that?

 

[WayneShaw]

Shade Tree tuners are .900 I think.

 

[carlsbad]

The shade tree I have is 3/4" threads.

 

[ronsatspokane]

You have access to a lathe Praveen.

 

[praveen]

You have access to a lathe Praveen.

I do... and it has been very helpful but its still 300 miles away

 

[joshb]

What kind of tuner is that?

I can’t remember! I bought it here a few years ago. I was gonna put it on a 6ppc, then got side tracked and it sat in a drawer. I’d have to search back thru my PMs to find it’s origin. 300 PMs, maybe?
Ha!
Found it in October 2018 PMs!
Shade tree from Mike Ezell himself.

 

[gunsandgunsmithing]

I have a tuner in a drawer I bought a few years ago and never used. I’ll go check it. My memory says it’s an Ezell. First is the outside of threads. Second is inside of threads.View attachment 1227874View attachment 1227875View attachment 1227876

Josh, that's not my tuner but it does look like a Shadetree, sold by Butch Lambert at one time.

Mine look like these.---Mike

p.s....As for opening my tuner to .900, it can be done but it's a lot easier to change the barrel threads.

 

[joshb]

Josh, that's not my tuner but it does look like a Shadetree, sold by Butch Lambert at one time.

Mine look like these.---Mike

p.s....As for opening my tuner to .900, it can be done but it's a lot easier to change the barrel threads.

Ok! Sorry! I only had the PM from you. Not the original ad you musta put up. It’s the first tuner I ever bought so I don’t know nuthin!
It is a Shadetree...so old Butch Lambert? Got it. I’ll put a note in the bag! I’m still learning this stuff. Seems to be more to learn, everyday!

 

[Dusty Stevens]

New Centerfire Tuner from ShadeTree Engineering « Daily Bulletin

Butch Lambert of ShadeTree Engineering sent us these photos of his new barrel tuner for centerfire Benchrest guns. Developed with the aid of Shelley Davidson, the new tuner weighs 6.4 ounces and should work for both Heavy Varmint and Light Varmint Rifle. A special barrel contour has been...

bulletin.accurateshooter.com