• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

Sad Day for 2A

Status
Not open for further replies.
5 million more AMERICANS voted for Biden. Consider that...!!!
Why the count after the election day ? Trump appointed a post master with the expressed instruction to hobble the USPS before the election, knowing that most democrats' would vote via mail.. He dismantled numerous high speed sorting machines, cut over time, delayed pickup and shipping of mail.. The end product was that absente ballets we delayed getting to voters and when returned were delayed getting to counting centers
Luckily the courts (many states) saw through this con, and extended the counting time.

I know the posts keep re-enforcing all these conspiracies. You don't want to see the truth, Trump lost.!
 
LA50SHOOTER said:
You seem a bit Hypocritical from your position. - And WHY are you so attracted to these type of threads and stiring the Pot ? -

Try helping out a new shooter or something constructive !!
Click to expand...
Good question.... Made me think about it for a minute. I am an active competition shooter, so I read postings on this web site. (BTW one of the best web sights on the internet)
I guess what gets me is the absolute un-truths that are re-enforced by one poster to another. It just continues to grow. Sure I know I may rub some of the the posters on this tread, the wrong way. Maybe I can open a few eyes.... Most unlikely. But there are other voices out there.
 
Gina1 said:
Good question.... Made me think about it for a minute. I am an active competition shooter, so I read postings on this web site. (BTW one of the best web sights on the internet)
I guess what gets me is the absolute un-truths that are re-enforced by one poster to another. It just continues to grow. Sure I know I may rub some of the the posters on this tread, the wrong way. Maybe I can open a few eyes.... Most unlikely. But there are other voices out there.
Click to expand...
So- IMO you are a "TROLL" - because I've seen nothing technical in the way of shooting, reloading or the "real reason" why most are here. - Your Primary Purpose so it seems is to sow the seeds of discourse over political matters. -
 
Gina1 said:
Good question.... Made me think about it for a minute. I am an active competition shooter, so I read postings on this web site. (BTW one of the best web sights on the internet)
I guess what gets me is the absolute un-truths that are re-enforced by one poster to another. It just continues to grow. Sure I know I may rub some of the the posters on this tread, the wrong way. Maybe I can open a few eyes.... Most unlikely. But there are other voices out there.
Click to expand...
I have to admit, you did open my eyes. What I see is a person that's obviously Bipolar and missed the normal morning dose of Prozac. All you do is believe in the main stream media which is proven to be biased and influenced by Silicon Valley to corrupt the truth. Calling Biden the President Elect (which he isn't) to even calling him President, which I hope he won't be. This election isn't over!! I am a strong believer in every vote counts, period. But I qualify that belief in that every LEGAL vote counts; not votes from the grave and not votes that were illegally cast; and certainly NOT votes filled out by corrupt vote counters.
 
LA50SHOOTER said:
So- IMO you are a "TROLL" - because I've seen nothing technical in the way of shooting, reloading or the "real reason" why most are here. - Your Primary Purpose so it seems is to sow the seeds of discourse over political matters. -
Click to expand...
Shucks... now I'm a troll, because I disagree with you.
Hmmmm You don't see any thing technical Didn't look to hard did you ?

Induction brass annealer redux

My first annealer was built with the help of hollywood. He worked long and hard on finding the right coil size. He also came up with the water cooled coil and the radiator/pump system for it. I added the timer system, trap door, and voltage/current monitor meter. Together we came up with what...
forum.accurateshooter.com
 
Lee in Texas said:
Gina signed up 9 1/2 years ago, waiting for her chance to talk trash about President Trump. I’m not upset with her. I’m impressed.

Gina- will you buy me a lottery ticket? I’d be happy to split the winnings with you.
Click to expand...
Anytime Send me the 6 winning numbers
 
Gina1 said:
5 million more AMERICANS voted for Biden. Consider that...!!!
Why the count after the election day ? Trump appointed a post master with the expressed instruction to hobble the USPS before the election, knowing that most democrats' would vote via mail.. He dismantled numerous high speed sorting machines, cut over time, delayed pickup and shipping of mail.. The end product was that absente ballets we delayed getting to voters and when returned were delayed getting to counting centers
Luckily the courts (many states) saw through this con, and extended the counting time.

I know the posts keep re-enforcing all these conspiracies. You don't want to see the truth, Trump lost.
Click to expand...
The Democrats never accepted the results of the 2016 election and spent the last 4 years trying to overturn it. But now that the shoe is on the other foot - the Republicans are supposed to just "suck it up" as Whoopi Goldberg put it so eloquently.
 
Gina1 said:
I read postings on this web site....I guess what gets me is the absolute un-truths that are re-enforced by one poster to another. It just continues to grow. Sure I know I may rub some of the [ ] posters on this tread, the wrong way. Maybe I can open a few eyes.
Click to expand...
Gina, I see that you finally surfaced; however, I haven't seen your response to post # 265 (that post may be at https://forum.accurateshooter.com/threads/sad-day-for-2a.4019869/page-14). Looking forward to whether your response "can open a few eyes."
 
Last edited:
In post #200 Gina1 said "I will say no more. Do not want to get the thread closed down."

I'm guessing with her rhetoric and nonsense she posted in the last hour or so she is attempting to do just that. Maybe she is fresh from an episode of "The View" or something.

No matter how many FACTS you show a lib, or how you try to reason with them, they are too brainwashed to see. She isn't the only one here.....there are a few others that are a little more subtle.

I'd ignore them. Otherwise all you'll do is reinforce their victim identity. It's like trying to convince a cultist they are in a cult. Until they figure it out for themselves nothing you say or do or show them will help them see reality.
 
I saw a “story” on the morning CBS news. One of their reporters went to Virginia to talk to the members of a “Militia”. They showed footage of a group of guys in camo practicing movement together in the woods. A guy would yell “threat” and the guys would raise their ARs to firing position.
Needless to say, Gayle King was VERY upset with this. “What is the threat they’re talking about!??!” , she says. The male reporter was “very concerned” and Gayle said “they were going to have to keep an eye on this!” ...”very disturbing!!”
I don’t remember her being “upset” when there was rioting and looting going on.
 
Last edited:
Gina1 said:
Shucks... now I'm a troll, because I disagree with you.
Hmmmm You don't see any thing technical Didn't look to hard did you ?

Induction brass annealer redux

My first annealer was built with the help of hollywood. He worked long and hard on finding the right coil size. He also came up with the water cooled coil and the radiator/pump system for it. I added the timer system, trap door, and voltage/current monitor meter. Together we came up with what...
forum.accurateshooter.com
Click to expand...
Looks to me @Hollywood did the "real work" and you did a write up. - So, How about you Continue to Pursue that path ? And maybe even "pony-up" $25 or $50 bucks to become a paying member ?
- What I'm saying is - Be useful on here rather than stoke the fire of discord. - You can do that over on facebook or some other place.
 
Gina1 said:
5 million more AMERICANS voted for Biden. Consider that...!!!
Why the count after the election day ? Trump appointed a post master with the expressed instruction to hobble the USPS before the election, knowing that most democrats' would vote via mail.. He dismantled numerous high speed sorting machines, cut over time, delayed pickup and shipping of mail.. The end product was that absente ballets we delayed getting to voters and when returned were delayed getting to counting centers
Luckily the courts (many states) saw through this con, and extended the counting time.

I know the posts keep re-enforcing all these conspiracies. You don't want to see the truth, Trump lost.!
Click to expand...

As a software engineer I am acutely aware of how 6,000 votes for Trump in Michigan could have "accidentally" been recorded as votes for Biden. Given that the same software is used in a number of states, I am suspicious of any vote recorded by that software. It is not just the misattribution and the extent of that particular issue that is the problem. The bigger problem would be if the software manufactured votes. Both are so easy to do in software. And of course there is likely a Database involved. Do you have any idea how easy it is to run a SQL script that changes the value of a column in a row within a database?
 
Status
Not open for further replies.

Similar threads

Just when you get all the answers they change all the questions
Replies
13
Views
2,341
Hummer

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Classified Ads

Forum statistics

Threads
166,630
Messages
2,222,476
Members
79,768
Latest member
Isaiah1611

Share This Page

Back
Top