• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

Need Help with a 20 Vartarg Build

I’d like to get a 20 Vartarg put together. I have a Remington model Seven in 300 BO as a donor. From what I have read this should be a good rifle to use for the conversion. I’d just like to verify the mag box, follower and spring will work as is.

Second, there are the Model 7 BO action only out there. If you use one of these it looks like the magazine, spring and follower might be difficult to find. Any idea where these can be found.
Thanks.
 
Pacific tool and gauge makes a follower. http://pacifictoolandgauge.com/10473-remington-model-7-221-follower.html There shipping times seem to be horrendous even if the item is in stock so be prepared to wait. I've been waiting on a 6 BR go gauge for a moth that they claim they have 58 in stock. I believe I ordered my magazine box and follower directly from Remington. This was several years ago, before the latest bankruptcy, and the order was smooth and it shipped promptly. Not sure what the status is today.

Ryan
 
Since the magazine is already set up too feed the 300black out, it should feed that 20 VT case. Try it first before you go diving into changing it, could save you a lot of time and extra money.
Hopefully you went with the 1/11 twist in the barrel, as that seems to be the one that works best, overall with the 20 bores. You will enjoy your 20 VT.
 
Since the magazine is already set up too feed the 300black out, it should feed that 20 VT case. Try it first before you go diving into changing it, could save you a lot of time and extra money.
Hopefully you went with the 1/11 twist in the barrel, as that seems to be the one that works best, overall with the 20 bores. You will enjoy your 20 VT.
I have not ordered the barrel yet but it will be a 11 twist. The parts question was in regards to the action only. It has no mag box, spring or follower. I would prefer to use this first instead of the complete rifle.
 
I believe I ordered my magazine box and follower directly from Remington. This was several years ago, before the latest bankruptcy, and the order was smooth and it shipped promptly. Not sure what the status is today.

Ryan
I tried to call Remington, got a voice mail that their offices are not open. Are there any other alternatives? I've seen a blocked mag box for 17 rem, 222 and 223. It looks like it has a block in the magazine but not sure if is long enough for the shorter Vartarg. I ordered the follower from PTG. So if anyone has a lead of a mag box and spring I would appreciate it.
 
If you don't already have some and plan to use Lapua brass you may want to stock up on some new old stock that's still sitting on the shelves wherever you can find it because I believe Lapua has discontinued making 221FB brass which is the parent case to the 20VT.
 
I tried to call Remington, got a voice mail that their offices are not open. Are there any other alternatives? I've seen a blocked mag box for 17 rem, 222 and 223. It looks like it has a block in the magazine but not sure if is long enough for the shorter Vartarg. I ordered the follower from PTG. So if anyone has a lead of a mag box and spring I would appreciate it.
Red hawk rifles used to stock most Remington bolt action parts. Give them a look maybe.
 
I’d like to get a 20 Vartarg put together. I have a Remington model Seven in 300 BO as a donor. From what I have read this should be a good rifle to use for the conversion. I’d just like to verify the mag box, follower and spring will work as is.

Second, there are the Model 7 BO action only out there. If you use one of these it looks like the magazine, spring and follower might be difficult to find. Any idea where these can be found.
Thanks.
PM sent.
 
If you don't already have some and plan to use Lapua brass you may want to stock up on some new old stock that's still sitting on the shelves wherever you can find it because I believe Lapua has discontinued making 221FB brass which is the parent case to the 20VT.
Discontinued it??? Whatt???
 

Per Lapua "This case is no longer in active production."
 

Per Lapua "This case is no longer in active production."
That's terrible news. Maybe it's just on hold while they produce other things that are in short supply and not being discontinued forever.
 

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Forum statistics

Threads
166,258
Messages
2,214,443
Members
79,479
Latest member
s138242
Back
Top