Turbo bolt disassembly

[PatMiles]

Any of the good folks here willing to tell me the correct procedure for disassembling a Turbo 2 lug 22 rimfire bolt for cleaning purposes? Tools necessary?
Thanks,
Pat

 

[JMayo]

Google it.
I have a tool.
The allen screw in the end is a protector, it comes out. Then you position it so you can use a paper clip to push out pin when you get the pressure off the spring with the tool.
Prolly a video on you tube.
Putting the bolt in the correct position when putting it back together is important !

 

[PatMiles]

Prolly a video on you tube.

No video on YouTube that I could find.

 

[JMayo]

I believe a XIII / 10X & Turbo are the same. The tool may need the pin slot made bigger.
I have a video of using the tool to disassemble a XIII.

 

[Tim s]

Don’t need to, have all three and use the OEM tool.

 

[JMayo]

I took a friends apart with mine and his pin on a turbo was bigger than my 10x tool .... Gap needing to loose some material or wedge up in where spring is ....don't want that.