SELLING Savage & Remage prefits

[RaggedHoleBarrels]

Offering Savage ($260) and Remage ($280) prefit barrels cut from stainless steel Wilson barrel blanks. We have calibers .17 - .505 available in #2, #4, #5 (available in calibers 9.3 and up) and Light Varmit contours in stock. We most likely have the reamer for the cartridge you want so lead times for the basic package is 3-8 weeks. Stainless barrels nuts are an additional $45. We can flute the barrels for $120 or spiral flute for $150. We can install a KDF muzzle break for $200 available in 3 types.

We are a fully equipped gunsmithing shop located in Sparks NV.

For questions call Isaiah at (415)328-0574 or email at Isaiah@raggedholebarrels.net or order directly from raggedholebarrels.net

 

[painter]

I have one of your remage barrels on a 700,#4 contour, 1/9 twist 6x45 very well satisfied, shoots well, easy to clean, seirra 85 hpbt 24gr n133 shoots small.

 

[JSH]

I got a 6mm 1-8 HV early this year. Must have shipped minutes after I ordered as it was there in three days.
Very nice work, packaged well. Barrel shoots and cleans well.
Still working on loads, but shows enough promise of shooting as well as a barrel I have that I waited a long time on and paid 3-4 times as much.
Jeff

 

[Fast14riot]

Do you offer any heavier contours, or what is the heaviest RemAge contour you can do?

 

[limpy]

Offering Savage ($260) and Remage ($280) prefit barrels cut from stainless steel Wilson barrel blanks. We have calibers .17 - .505 available in #2, #4, #5 (available in calibers 9.3 and up) and Light Varmit contours in stock. We most likely have the reamer for the cartridge you want so lead times for the basic package is 3-8 weeks. Stainless barrels nuts are an additional $45. We can flute the barrels for $120 or spiral flute for $150. We can install a KDF muzzle break for $200 available in 3 types.

We are a fully equipped gunsmithing shop located in Sparks NV.

For questions call Isaiah at (415)328-0574 or email at Isaiah@raggedholebarrels.net or order directly from raggedholebarrels.net

Looking for savage small shank 6x45 10 twist #4 20”

 

[Greymatter762]

Old thread. There prices have gone way up at this point. Around $400 for a prefit. It would be worth it if they were still around $300.