Probably a fast lot of Varget and/or a short free bore.If I try to get to 32. Anything of varget with mine it pops primers.
Try RL16. Probably get you close to 100fps more with less pressure with just as good of not better accuracy. And more temp stable than Varget.Not sure. But I have pulled away from this one because of this.
Will do.Try RL16. Probably get you close to 100fps more with less pressure with just as good of not better accuracy. And more temp stable than Varget.
34.5 is good place to start with 105-110 range bullets. Some end up in the mid/high 35 range some don’t, just depending on the barrel and chamber.Will do.
Approx charge wait?
Thank you34.5 is good place to start with 105-110 range bullets. Some end up in the mid/high 35 range some don’t, just depending on the barrel and chamber.
105 bullet and 28 in. barrel.what velocity do you get and what es?Try RL16. Probably get you close to 100fps more with less pressure with just as good of not better accuracy. And more temp stable than Varget.
107SMK’s in a 27” .236” Krieger .140” fb. 3020fps. Under 10es.105 bullet and 28 in. barrel.what velocity do you get and what es?
Ask your gunsmith if he noticed the bore is super tight. mine couldn’t get the bushing in the chamber end to indicate it. we should have pulled the plug then and there. I just went through with it. It was a Krieger that was way to tight. 32.0 was blowing primrs and I lost primer pockets before I could drop down far enough to get a load. I pulled the barrel I was so pissed off. _If I try to get to 32. Anything of varget with mine it pops primers.
I will have him you know what am at point I am atAsk your gunsmith if he noticed the bore is super tight. mine couldn’t get the bushing in the chamber end to indicate it. we should have pulled the plug then and there. I just went through with it. It was a Krieger that was way to tight. 32.0 was blowing primrs and I lost primer pockets before I could drop down far enough to get a load. I pulled the barrel I was so pissed off. _