Norma Dasher Brass

[Liven The Dream]

I maybe Beating a Dead Horse ?

After a long , long wait I have my Rifle in my Hands.
It is built on the New Norma Dasher Reamer and Brass.

I am now getting Bad Press on the Brass ? I would welcome input .

I have taken it to the Range for Break In and Testing loads , No signs of trouble yet ?
My loads where low 31.5 Gr. Varget CCI 450 105 Berger HB and VLD's .

Thanks,
Don

 

[FatBoy]

Mine shoots good, Don. However, I didn't go into it with any pre-conceived notions of what it should take to shoot, I worked up just like a brand new to me chambering.

FWIW, I run 32gr of Varget under a 107SMK. I don't shoot BR but is a very accurate load that stays that way with no fuss.

Building my second Norma Dasher right after Christmas, when I am officially presented the barrel and brass

 

[Liven The Dream]

Mine shoots good, Don. However, I fofnt go into it with any pre-conceived notions of what it should take to shoot, I worked up just like a brand new to me chambering.

FWIW, I run 32gr of Varget under a 107SMK. I don't shoot BR but is a very accurate load that stays that way with not fuss.

Building my second Norma Dasher right after Christmas, when I am officially presented the barrel and brass

Thanks Chris.

 

[oldduc]

I maybe Beating a Dead Horse ?

I am now getting Bad Press on the Brass ? I would welcome input .

Thanks,
Don

Don, you will get "Bad Press" on just about anything you mention on here that is not the brand whores preferred brand. People that have never touched the thing will tell you that it is a POS. Do whatever works for you and don't get too excited about the folks that have no life other than bad mouthing other peoples projects.
Gary

 

[muleystalker]

I have been using it with no problems, I have over 10 loadings on one batch and pushing 110 SMK's at 3040fps on them. I'm confident in them enough I had another rifle built using them and it is also back in stock.

 

[Liven The Dream]

Don, you will get "Bad Press" on just about anything you mention on here that is not the brand whores preferred brand. People that have never touched the thing will tell you that it is a POS. Do whatever works for you and don't get too excited about the folks that have no life other than bad mouthing other peoples projects.
Gary

I am with you . I am very happ with my Test Run .
Good Points Gary

 

[muleystalker]

Just to be clear my rifles were chambered using a reamer from Bullerts.com spec'd for the Norma brass.

 

[Puzzaz01]

Don, you will get "Bad Press" on just about anything you mention on here that is not the brand whores preferred brand. People that have never touched the thing will tell you that it is a POS. Do whatever works for you and don't get too excited about the folks that have no life other than bad mouthing other peoples projects.
Gary

Better words have never been spoken.

Darrin

 

[Liven The Dream]

Just to be clear my rifles were chambered using a reamer from Bullerts.com spec'd for the Norma brass.

As is my Rifle .

 

[FatBoy]

Just to be clear my rifles were chambered using a reamer from Bullerts.com spec'd for the Norma brass.

And mine.

 

[hicap40]

what do you guys trim your norma brass length to

just curious

John Hiller

 

[oldduc]

what do you guys trim your norma brass length to

just curious

John Hiller

John, as I mentioned in the other Norma Dasher Brass thread I trimmed mine to 1.570 for a 1.582 chamber. I shot the rounds today and the brass grew to 1.572.
Gary

 

[hicap40]

thank you