Coolant / lube hose assembly with mag base, that won't leak?

[tobnpr]

I just switched over to a high pressure pump instead of the stock one (Grizzly sump) to feed the pressure reamer flush system I finally got built..and also the cross-mounted mag base and hose- but the plastic loc-line /base drips like a sieve under the 45 psi. I'm sure they're not designed for that kind of pressure.

Looking at the all-metal one from HHIP "Pro Series"; anyone have experience with it, or another recommendation?

I could re-plumb it all and run separate pumps/systems for the collet/chamber flush and cross-slide but trying to keep it simple.

 

[Dusty Stevens]

Put a regulator in line before the flex base. You can get a simple mr gasket inline one from oriellys in the fuel pump section

 

[tobnpr]

Put a regulator in line before the flex base. You can get a simple mr gasket inline one from oriellys in the fuel pump section

Makes sense...I run dark oil mixed with tranny fluid, so this should hold up well. Thanks.