• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

Ammo Caddies at Atterbury

Just a reminder - I will have some Caddies this weekend at Atterbury!

AC 2018 X2 IMG_2828.jpg

Just $70 in person for the standard Caddies as shown, $75 for 300 WSM (one left now - - more soon)

Alex
 
Kurt Blasser said:
Alex, Any chance of a special order for 22 LR?
Click to expand...
Kurt -

You are in luck - maybe . . . I have one 22LR 60-Round Caddie with Timer, ready to ship.
I made several of these Caddies as special order for Free Pistol (ISSF / Olympics) shooters. They shoot 60 rounds in two hours; hence the special timers, which are the Timers I use now for all the Caddies.
The price is $95 shipped USPS Priority ($85 in person).
CC 22LR 60-Rnd X3 POST IMG_2501.jpg

I have also made 35-Round Caddies, using the former Timer, which timers are longer available. I can make a similar Caddie with the new Timer, and its price would be $65 shipped USPS Priority.
The only issue is the timing; I would not be able to work on this until mid-October.

This is the 35-Round Caddie with the no-longer available Timer, but I can design a new similar Caddie with the new Timer (as for the 60-round Caddie).
CC 22LR Oak 35-Rnd.jpg

Please let me know what you would like.
Thanks!
Alex
 
Last edited:
Alexander-M said:
Kurt -

You are in luck - maybe . . . I have one 22LR 60-Round Caddie with Timer, ready to ship.
I made several of these Caddies as special order for Free Pistol (ISSF / Olympics) shooters. They shoot 60 rounds in two hours; hence the special timers, which are the Timers I use now for all the Caddies.
The price is $95 shipped USPS Priority ($85 in person).
View attachment 1061458

I have also made 35-Round Caddies, using the former Timer, which timers are longer available. I can make a similar Caddie with the new Timer, and its price would be $65 shipped USPS Priority.
The only issue is the timing; I would not be able to work on this until mid-October.

This is the 35-Round Caddie with the no-longer available Timer, but I can design a new similar Caddie with the new Timer (as for the 60-round Caddie).
View attachment 1061459

Please let me know what you would like.
Thanks!
Alex
Click to expand...
Thanks Alex, I'll take one of the sixty round versions. I'll PM you.
 
Kurt,

I shipped your Caddie, and its expected delivery is Saturday 18 Aug.

(Two-day delivery - As good as Amazon Prime!)

Thank you -

Alex
 
Put two more on the September delivery list. my wife wants to get me two for my B-day, which isn't until the end of September.

one for 6BR/Dasher, and the other in 6.5-284/308 Win.
 
Please make them for bullet down depth. If I ever want to tell the world how absent minded I was once at an HBR match, going into the last 5-shot target; I will simply say placing 308 rounds nose down saved me. Somehow, I had missed depriming a fired case and reloaded it. Luckily a spent primer sticks out like a sore thumb in a reloading tray.
 
IdahoSharpshooter said:
Please make them for bullet down depth. If I ever want to tell the world how absent minded I was once at an HBR match, going into the last 5-shot target; I will simply say placing 308 rounds nose down saved me. Somehow, I had missed depriming a fired case and reloaded it. Luckily a spent primer sticks out like a sore thumb in a reloading tray.
Click to expand...
All the Ammo Caddies I make will hold the cartridges bullet up or down. The holes are counter-bored to accept the cases, and through holes under the counterbores allow the bullets to protrude through.

I used to stage the cartridges bullet up myself, and the spent cases with the primers up. But after a while I decided that it was easier for me to stage the rounds bullet down and pick them up to load them in the rifle.

At matches I have been where shooters use my Ammo Caddies, I would guess that it is half-and-half as far as using them bullet up or bullet down. It's just a question of personal preference.

Thx!
Alex

PS. Would you like one? :)
 
IdahoSharpshooter said:
Alex,

:) Two weeks my friend. I did tell my wife. I was scared I might get aftershave or socks...
Click to expand...
Kurt,
The two Ammo Caddies shown at top are the same - they can handle the 6mm - 30BR - 308-284.

I used to make two separate models - one dedicated for 6mm-30BR, etc. and the other for 308-284... but I always was out of the one that was in demand, and shooters had to wait for the 'next' batch. So I decided to make one model for both: the counterbores and through holes are the same; based on the 308. It was the depth of the counterbore that used to be different. The 6mm family counterbore was 3/4" deep, and the 308 family counterbore 1" deep. Now they all are 7/8" deep, and work well for all.

That having been said, I will gladly make two dedicated Ammo Caddies for you - one for 6mm and the other for 308, but they will not be ready for about three to four weeks.

Alex
 
that is even better. Custom, one of a kind ammo caddies for my 69th B-day September 24th.

I appreciate this, and so does my lovely wife once I showed her.

Rich
 
Alex where canI get new timers? My timers after 2 years of abuse and a few new batteries have decided not to work any longer.
 
You must log in or register to reply here.

Similar threads

Alexander-M
Cartridge Caddies at LODI next week - Wednesday!
Replies
0
Views
371
Alexander-M
Alexander-M
Alexander-M
New and Special Ammo Caddies
Replies
0
Views
326
Alexander-M
Alexander-M
Alexander-M
2018 Caddies with New Timers
Replies
4
Views
533
Dusty Stevens
Dusty Stevens

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Classified Ads

Forum statistics

Threads
166,303
Messages
2,216,203
Members
79,551
Latest member
PROJO GM

Share This Page

Back
Top