• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

Bart's 103g Dominator vs 105g Infinity

Mr. O`Hara, this was right on the money! A buddy gifted me 100 of Barts Gungineers, shot this with Fed 205M and found happiness!! Thank you!

Makes a guy wonder how long is that dang bullet line by now......:(

don't matter get in it and order a bunch, I just finished up one lot and open the next one and loaded some.... same load and they shot in a hole.... lol....jim
 
Which model bullet, or named bullet is your favorite so far? My pockets are not deep and want to get it right. I trust your opinion.
 
Mr. O'hara and I share the same admiration for .236" bore barrels, and Bart is a .237" guy I believe, so there lies my desire to ask like minded shooters. I know I shoot in Memphis, and I am the odd man out on .236 vs 237, but am happy to be there.
 
Last edited:
Actually I’m not partial either one .236 or 237. I also don’t buy into smaller bullets shoot in .236 and fat bullets shoot better in 237 either!
 
I would have thought that barrel manufacturers tolerances would make the .236-.237 debate closer to the two being more similar than some may think..
 
Which model bullet, or named bullet is your favorite so far? My pockets are not deep and want to get it right. I trust your opinion.
I have one lot of the 103's that I only have 52 bullets left in the box. Send me a PM with your address and I will ship them to you no cost. That way you can try them for yourself. The 103's are my favorite
 
I have one lot of the 103's that I only have 52 bullets left in the box. Send me a PM with your address and I will ship them to you no cost. That way you can try them for yourself. The 103's are my favorite
PM sent with gratitude!!
 
Actually I’m not partial either one .236 or 237. I also don’t buy into smaller bullets shoot in .236 and fat bullets shoot better in 237 either!
I have a 3 digit lot number of Spencer bullets, and have shot them in both bore sizes, and they shot like Spencers do in both bores, quite well. They measured .2432" on the nose.
 
Last edited:
I have a 3 digit lot number of Spencer bullets, and have shot them in both bore sizes, and they shot like Spencers do in both bores, quite well. They measured .243" on the nose.


.243 at the pressure ring? mine were always .2437 at the PR. ..... jim
 

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Forum statistics

Threads
165,927
Messages
2,206,426
Members
79,220
Latest member
Sccrcut8
Back
Top