Amp Aztec Question

[PA Jeep]

I wanted to make sure a purchase of Amp Aztec will fit my needs. I have read that Aztec will find proper annealing settings for different lots of the same caliber brass. Sounds great. Will Aztec find the proper annealing setting for neck up or neck down "wildcat" calibers? For instance will Aztec work on a 30-416 Rigby AI, 22-6.5x55 35-308Win etc? Thanks

 

[Willie]

I have only used Aztec on a couple of 6.5 wildcats, but so far it's looking good. A Vickers test would be needed to confirm how "spot on" the Aztec is.

I'd email Alex for any questions. You'll get a quick reply to all your questions.

Edit: Be sure to go to the site to find how to pick the right sacrifical case, if you have a variance between your brass.

 

[LVLAaron]

I wanted to make sure a purchase of Amp Aztec will fit my needs. I have read that Aztec will find proper annealing settings for different lots of the same caliber brass. Sounds great. Will Aztec find the proper annealing setting for neck up or neck down "wildcat" calibers? For instance will Aztec work on a 30-416 Rigby AI, 22-6.5x55 35-308Win etc? Thanks

It will with aztec mode, yes.

You need to make sure you use the correct pilot, though. This ensures the neck area is at the correct depth in the machine.

 

[338 dude]

I wanted to make sure a purchase of Amp Aztec will fit my needs. I have read that Aztec will find proper annealing settings for different lots of the same caliber brass. Sounds great. Will Aztec find the proper annealing setting for neck up or neck down "wildcat" calibers? For instance will Aztec work on a 30-416 Rigby AI, 22-6.5x55 35-308Win etc? Thanks

Yes

 

[Jennb]

For sure you will like the AMP. Shoot them an email to find out which pilot you need to use if it is not listed.