22BR loads w IMR 8208 XBR / VV N135 ?

[CT10ring]

Hello-
I have good loads w/ Varget, but curious to see if any info on these 2 powders?
I have a good supply of VV N135...

1/12 twist 25" LV Shilen SS select bbl, Rem 700.

Typically using Sierra 55 Blitz & Sierra 60g HP #1375, have other V Max, Bergers on hand.
walking varmint rifle w sling bipod & rear bags...

Thx for any info...

 

[SteveOak]

You might have better luck in the 'Small Stuff" sub-forum; http://forum.accurateshooter.com/forums/small-stuff-22s-20s-and-17s.8/

 

[CT10ring]

You might have better luck in the 'Small Stuff" sub-forum; http://forum.accurateshooter.com/forums/small-stuff-22s-20s-and-17s.8/

yup, posted there,thx.

 

[JEFFPPC]

Hello-
I have good loads w/ Varget, but curious to see if any info on these 2 powders?
I have a good supply of VV N135...

1/12 twist 25" LV Shilen SS select bbl, Rem 700.

Typically using Sierra 55 Blitz & Sierra 60g HP #1375, have other V Max, Bergers on hand.
walking varmint rifle w sling bipod & rear bags...

Thx for any info...

I have done the best with W748.

 

[CT10ring]

I have done the best with W748.

I am hearing of this powder, for 22 BR - I'll try it!

 

[NWnewguy]

8208 should be a solid powder for the 22BR. I haven't tried it yet for that but it's worked great in 223. I would look at the 6br loads for it and reduce a bit and then work up. Sorry I don't have any real useful data there, but it's the powder I'm planning on using once I get my barrel spun on.

 

[redrockranger]

Hello-
I have good loads w/ Varget, but curious to see if any info on these 2 powders?
I have a good supply of VV N135...

1/12 twist 25" LV Shilen SS select bbl, Rem 700.

Typically using Sierra 55 Blitz & Sierra 60g HP #1375, have other V Max, Bergers on hand.
walking varmint rifle w sling bipod & rear bags...

Thx for any info...

Please use with caution disclaimer. IMR 8208 XBR. RP brass. Start 28 grs. 8208 and work up. Works well for me and Hornady 53 V-Max.

 

[CT10ring]

Please use with caution disclaimer. IMR 8208 XBR. RP brass. Start 28 grs. 8208 and work up. Works well for me and Hornady 53 V-Max.

Great, thank you! Hope to load & shoot this week.

 

[redrockranger]

Great, thank you! Hope to load & shoot this week.

IMR 8208 XBR goes thru a power measure almost as well a ball powder. It works well for me in 223, 22br and 20 Practical and it's temperature insensetive.

 

[urbanrifleman]

I would give a hard look to LT 32.

 

[CT10ring]

I would give a hard look to LT 32.

just checked it it out. never heard of before. thx much.