30-'06 175smk load data

[Fast14riot]

New barrel on my hunting rifle, starting to work up a load for the 175smk over H4350. Using Win brass and Fed210 primers. Wondering if anyone has a favorite load with these.

 

[Depart123]

New barrel on my hunting rifle, starting to work up a load for the 175smk over H4350. Using Win brass and Fed210 primers. Wondering if anyone has a favorite load with these.

If you don't find a good load between 56.5 grains and 57 grains. Then it isn't the load.

 

[Fast14riot]

I've got a ladder test loaded up, but started it at 57gr and have it up to 59.7gr in 0.3gr increments. I know that's almost a whole grain over max, but I don't have to shoot them if pressures are getting high. Hoping to be around 2800-2850fps. I may load up a few more under 57gr too.

 

[Depart123]

I've got a ladder test loaded up, but started it at 57gr and have it up to 59.7gr in 0.3gr increments. I know that's almost a whole grain over max, but I don't have to shoot them if pressures are getting high. Hoping to be around 2800-2850fps. I may load up a few more under 57gr too.

In my experience, the high node usually shows up in the range I previously stated. You may find a small node higher, but it will likely be a minor node, and probably hard on brass to boot.

 

[rwk]

Will these work with a 175 vld hunting bullet same cal.

 

[Depart123]

Will these work with a 175 vld hunting bullet same cal.

I don't see why not, But just like any other load YMMV.