Reloading the SCHP 9mm

[GOMEZ3247]

Ive been reloading for a few years now and am always learning something new. I reload mainly .223, 9mm, and 40SW. I came across some 9mm SCHP in 95 grain. The length of the bullet is .585, a far cry from the Hornady 90gr XTP ive been loading. (.445). However i can find zero reloading data on such a projectile. Im curious about the right powder, seating depth, etc. I currently use the Lymans reloading manual 49th edition, there is nothing that covers this type of bullet. Am i being to anal? "Just load em and shoot em" I am notoriously exact when it comes to my reloads, but to find zero info is crazy. Any help would be appreciated

 

[Comrade Terry]

Who is the bullet manufacturer? The first place I'd look for info would be the manufacturer's web site.

 

[Rsadams]

I think he means solid copper hollow point.... Terry is correct , did you look on their website..?

 

[GOMEZ3247]

I think he means solid copper hollow point.... Terry is correct , did you

Its copper only projectiles, when a search is done it goes through midway. So again nothing. But thanks for the replies

 

[Zero333]

What 9mm cartridge are you talking about ???

9mm Bermann-Bayard ?
9mm Browning long/short ?
9mm Federal ?
9mm Largo ?
9mm Makarov ?
9mm Mauser ?
9mm Steyr ?
9mm Win Mag ?
9x18 Ultra ?
9x21 ?
9x19 / 9mm Luger / 9mm Parabellum / 9mm Nato ?

j/k

Quickload shows 4.4 gr of Titegroup to generate almost 34,000 psi.
1.130" coal
0.585" bullet length / 95 gr
4.5" barrel = 1,264 fps.
-----------------------------
Same as above but 1.100" coal and 4.1 gr Titegroup = 33,500 psi.

Any other powders you want me to run through Quickload let me know.

 

[GOMEZ3247]

What 9mm cartridge are you talking about ???

9mm Bermann-Bayard ?
9mm Browning long/short ?
9mm Federal ?
9mm Largo ?
9mm Makarov ?
9mm Mauser ?
9mm Steyr ?
9mm Win Mag ?
9x18 Ultra ?
9x21 ?
9x19 / 9mm Luger / 9mm Parabellum / 9mm Nato ?

j/k

Quickload shows 4.4 gr of Titegroup to generate almost 34,000 psi.
1.130" coal
0.585" bullet length / 95 gr
4.5" barrel = 1,264 fps.
-----------------------------
Same as above but 1.100" coal and 4.1 gr Titegroup = 33,500 psi.

Any other powders you want me to run through Quickload let me know.

Great info. I appreciate it, these casings are all once fired so its an array different headstamps. I ended up using titegroup @ 4.3gr. And a coal of 1.100.