• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

Whats the best? Im upgrading..

Sniper338

Whats the best powder scales on the market and best trickler to fill the tray on the scale?

Im upgrading, not because mine dont work, just because Im jumping in deeper and starting competitions.
 
Sniper338 said:
Whats the best powder scales on the market and best trickler to fill the tray on the scale?

Im upgrading, not because mine dont work, just because Im jumping in deeper and starting competitions.
Click to expand...
What is your definition of "the best"? Sartorius scales are very excellent and are at or above the $1000.00 mark. The GemPro 250 is about $200.00 and will eek out the job. However, if you want the most "bang-for-the-buck", I would get a A&D FX-120I for about 500.00 bucks. It is fast accurate and very reliable. Then I use the Yellow Omega Trickler..
 
ShootDots said:
What is your definition of "the best"? Sartorius scales are very excellent and are at or above the $1000.00 mark. The GemPro 250 is about $200.00 and will eek out the job. However, if you want the most "bang-for-the-buck", I would get a A&D FX-120I for about 500.00 bucks. It is fast accurate and very reliable. Then I use the Yellow Omega Trickler..
Click to expand...


That about covers it!
 
ShootDots said:
What is your definition of "the best"? Sartorius scales are very excellent and are at or above the $1000.00 mark. The GemPro 250 is about $200.00 and will eek out the job. However, if you want the most "bang-for-the-buck", I would get a A&D FX-120I for about 500.00 bucks. It is fast accurate and very reliable. Then I use the Yellow Omega Trickler..
Click to expand...

+1. I bought a Gempro 250 and sold the thing a week later....tempermental as heck so I moved on and bought a Tanita that's works for me. It also depends on what you are reloading for in terms of pleasure or competition. I've heard many good things about the A&D FX-1201, but a bit pricey for me. But Shoots, I suspect you'll be pleased with A&D which I've heard zero complaints about.

Alex
 
Shynloco said:
+1. I bought a Gempro 250 and sold the thing a week later....tempermental as heck so I moved on and bought a Tanita that's works for me. It also depends on what you are reloading for in terms of pleasure or competition. I've heard many good things about the A&D FX-1201, but a bit pricey for me. But Shoots, I suspect you'll be pleased with A&D which I've heard zero complaints about.

Alex
Click to expand...
I too tried to go cheaper with the GemPro and found it too slow to settle and it would drift, even with LED lighting. I went up to the A&D FX-120i. As a afterthought, I also purchased a Tripplite line conditioner. Everything is coming up roses now. Even the GemPro is behaving better. This is one of things you just have to have for repetitive results.
 
Balance:
http://www.affordablescales.com/mettler-toledo/me-te/me104te.asp#.WW6-Z5Ek_1o

Trickler/scoops:
https://www.amazon.com/dp/B000N8OIE8/?tag=accuratescom-20

Perfect mixture of high tech/lo tech ;).

Honestly, the Sartorius Entris is about the lowest priced magnetic force restoration analytical balance you'll find:
http://balance.balances.com/scales/915/

Even as an entry-level analytical balance, the Entris is not inexpensive. However, you get what you pay for with balances. Before purchasing one of any type, the fist thing I would do is to decide to what level of precision I plan to weigh powder. That will usually point you in a specific direction. People here are using balances ranging from Scott Parker-tuned beam scales, to high end Mettler analytical balances, and everything in between. They all can work just fine. Once you decide how precise you want to be weighing powder, then you'll have a better idea what will/won't suit your needs.
 
Willie said:
I too tried to go cheaper with the GemPro and found it too slow to settle and it would drift, even with LED lighting. I went up to the A&D FX-120i. As a afterthought, I also purchased a Tripplite line conditioner. Everything is coming up roses now. Even the GemPro is behaving better. This is one of things you just have to have for repetitive results.
Click to expand...

Willie,
Glad you found relief in the line conditioner. That drifting is something I learned about about years ago and discovered that in addition to a sound Surge Protector/Line Conditioner, measures can be taken to alleviate interference from various sources and I was successful in employing those methods in three RCBS scales that I still use today, in addition to the Tanita. But that darn GemPro just wouldn't cooperate so I sold it and apparently the buyer got the sucker to work in his reloading environment. But those A&D scales are really nice and have a couple of shooting buddies who use them. One of my Gunsmiths, who competes, has the Sartorius that is quite a setup for the ultra serious reloader. But no doubt the A&D gives very reliable results.

Alex
 
gstaylorg said:
Balance:
http://www.affordablescales.com/mettler-toledo/me-te/me104te.asp#.WW6-Z5Ek_1o

Trickler/scoops:
https://www.amazon.com/dp/B000N8OIE8/?tag=accuratescom-20

Perfect mixture of high tech/lo tech ;).

Honestly, the Sartorius Entris is about the lowest priced magnetic force restoration analytical balance you'll find:
http://balance.balances.com/scales/915/

Even as an entry-level analytical balance, the Entris is not inexpensive. However, you get what you pay for with balances. Before purchasing one of any type, the fist thing I would do is to decide to what level of precision I plan to weigh powder. That will usually point you in a specific direction. People here are using balances ranging from Scott Parker-tuned beam scales, to high end Mettler analytical balances, and everything in between. They all can work just fine. Once you decide how precise you want to be weighing powder, then you'll have a better idea what will/won't suit your needs.
Click to expand...

Well for me accuracy to one kernel of powder is plenty. That is about 0.02grs.

Speed is another necessity.

Adam's system meets both of.these requirements

I have 3 gempros. When i used them i always trickled on one and checked the load on another one. Now that i have Adam's system they are stuck away in the reloading.cabinet.
 
Raythemanroe said:
People don't just throw powder these days?


Ray
Click to expand...

I just sold a beautiful harrell benchrest powder measure. Hated to sell it but i never use it anymore. A work of art to me. So smooth in operation.

I think a lot of short range benchrest guy still drop charges but i believe that is changing.

For pistol and plinking ammo, even for the 3 gun guys no doubt a powder measure is the fastest way to charge cases.

To each his own. There is no right or wrong way. Just what works for you.
 
I throw my initial charges with a Harells then trickle it up the last .5 gr on an FX120i with an Autotrickler. This setup works very well for me.
 
You must log in or register to reply here.

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Classified Ads

Forum statistics

Threads
166,239
Messages
2,214,248
Members
79,464
Latest member
Big Fred

Share This Page

Back
Top